# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
EZ installation, plan on towing my 1932 plymouth coupe to car shows around the state.
Clean finish look and easy to install. If you order one read closely. It comes with a pin for it already. No meed to order one separately.
# 2
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Fits and works great
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
# 3
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This is a huge difference maker for us. I can open the tailgate of our truck with the trailer still attached, and helps minimize any body damage if my backing up is not good.
# 4
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Should work great! Had to extend the hitch since the bike rack hit the bumper on the Traverse.
The receiver is exactly what I was looking for. Put it on a 2016 chevy traverse and it is the right length for pulling a trailer. Looked at 6 1/2 inch, too short. Quality is good also. I give it 4 stars.
# 5
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Works great, perfect fit!
Good product. Performs as described.
# 6
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Great product, but did not fit on my 2014 Traverse. The top receiver would rub on my fiberglass bumper of the Traverse and therefore only half the pin hole would line up with the receiver. Plus my 4 bike rack would not fit between car and pop up camper then.
Didn't take my husband long to install it on my vehicle. The only thing is that NO PIN comes with it so be sure to add one to your shopping cart as well. Heavy duty and everything worked as it should. Shipping was quick and notifications were received. The company followed up to make sure everything was good. This is what online, custom shopping experiences should be like.
# 7
Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs
It works!
Haven't used it yet. I bought it because of CURT's quality. It was beat up in shipping though.
# 8
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks
# 9
Ball Mount Adjustable with Sway-Control Tab, 6,000 lbs
I have not used yet.
The ball mount did not fit onto the shank. This was a very disappointing experience.
# 10
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
Works great, perfect fit!
High quality hitch for the price .
# 11
Curt Ball Mount for 2" Hitches - 6-1/4" Rise, 7-1/2" Drop - 13" Long - 5,000 lbs
Works great, perfect fit!
All the hardware fit and easy to follow instructions. Hitch is installed. Just need to put it to use now.
# 12
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 13
Curt Ball Mount - 6" Rise, 8" Drop - 11-1/2" Long - 5,000 lbs
Works great, perfect fit!
All the hardware fit and easy to follow instructions. Hitch is installed. Just need to put it to use now.
# 14
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
Works great, perfect fit!
All the hardware fit and easy to follow instructions. Hitch is installed. Just need to put it to use now.
# 15
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
I’m pleased with the product and how prompt the delivery was. However the packaging was insufficient and the packaging was torn open all over. Scuffing of the finish is a result and of little consequence due to the intended use. It’s a stinger w/ball for motorhome. May I suggest better packaging in the future
I like the extra long length. No one else make a hitch this long.
# 16
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 12" Long - 5,000 lbs
The receiver is exactly what I was looking for. Put it on a 2016 chevy traverse and it is the right length for pulling a trailer. Looked at 6 1/2 inch, too short. Quality is good also. I give it 4 stars.
Should work great! Had to extend the hitch since the bike rack hit the bumper on the Traverse.
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"