Most Popular Non-Binding for 2008 Hummer H3

Arrived quickly and well packaged. Took less than an hour to install on the RV with the included safety cables and wiring.I haven't pulled our Bronco with it yet but the tow bar appears to be well built and a quality product.

First, received the package and upon opening, found that the linch pins were missing. One phone call and issue was resolved and replacement items were being expedited to me. Appears the box came open on one end during shipment and parts came out before carrier retaped the tear. Good on E-Trailer for outstanding and prompt customer service! Now, the Sterling All Terrain towbar - very impressive unit as I had bought this on reputation only as no dealers had any in stock (they say it is too costly to carry in store). Very well made, excellent finish and welds. Instructions are quite clear and easy to follow. I like that when you purchase this unit, it is a “total package”. There is nothing I could see that is cheaply made - all quality. This was my first purchase from E-trailer, and based on how this order went start to finish, and having to deal with missing parts on an order - I am very pleased and will deal with them in the future.

So easy a caveman can do it. Great material quality, etrailer was fast on shipping, and hd support ready if needed. I consider myself an intermediate mechanic sk I had no problems doing this by myself. Instructions were good, I modified to make some install details easier and emergency link better.

It was a bit hard to get help with the installation, but after I got it in it's been great. Took a trip from Wisconsin to Washington DC and back and it all went smoothly.

The product works great. I love all the light features on it. Easy install and easy of use. Using the product with my RV and Jeep Gladiator.

The Nighthawk tow bar is very nice and easy to hook up. However, the electrial connection from "Towed" to Coach exits the left side of the tow bar and crosses under the receiver to connect to the Coach socket which is on the right side of the receiver. This causes the electrical cable to get tangled with the safety cables. It seems as though there should be separate parts for coaches with right or left connectors. I moved my Coach connector to the left side of the receiver to eliminate the tangle of the electrical cable with the safety cables. The tow bar is easy to connect and disconnect and store. Mine connects to the Roadmaster Spare Tire Carrier receiver which works well. I did have one incident where the electrical cord was somehow severed which meant that I had no operating supplemental brakes and no "Towed" lights. I did not know when it happened or how it happened. There should be some alarm when a disconnect occurs. I found the problem only because I stopped for a break and inspected everything. Since my "Towed" is very light and I did no hard braking, I did not notice the loss of supplemental brakes.

Was on the road when my 25 year old tow bar finally gave out. One call to Sheila at etrailer and I had my replacement on the way to fit my same base plates. And I got it the very next day in Ouray, Colorado where regular mail is always late. Etrailer has been consistently spot on every time I have needed anything for RVing and customer service is superb!

This tow bar is incredibly easy to use and our Grand Cherokee tracks very well even up to 70+ MPH. We are towing with our new Dynamax and are looking forward to our first long drive to Texas in December. Would highly recommend to anyone!!

We've been towing our Jeep Grand Cherokee for about 8 months now with this tow bar and it's worked flawlessly! We've been places where the coach and Jeep are not perfectly aligned putting the attaching pins in a bind, but with a simple release of the handle it would release the arm and unbind the pin. Super easy to use. I highly recommend the Nighthawk All Terrain, Non-Binding tow bar. OH! The LED lights along the arm make it look great too!!

Very nice tow bar. I like the way it stores on the back of my motor home.

Towed a 4 door Rubicon with Dodge 2500 truck. The tow bar did great on the 2000+ mile trip. The bar is very easy to couple and uncouple.

This is one of the best, two items I purchased of about 6 or 7 items acquired to rig my 2001 GMC YukonXL for flat towing. The 10,000 lb capacity is valued. the tow bar slides work well. the 3/4inch pins are strong and I have had no problems. The tow bar pulls a YukonXL with some extra stuff, fuel and tools and weighs probably 6,500 lbs (my est--haven't put it on a CAT scale). When I rig my 2020 Chev Silverado Trail Boss to flat tow, I expect to be able to use this.

Easy to install in place of an old Falcon towbar. As you can see in the photo it can be rotated to the side and latched in place. I needed this feature as we carry two electric bikes above the towbar. looking foward to not needing a rubber hammer to release the tension on the bars.

First time flat tower so can't compare it to any others. Installs easily and stows out of the way nicely. Build quality looks Very good and look forward to our trip. I've only done parking lot test drives.

Great purchase and suggestion from etrailer. This thing is so easy to hook up to the Jeep and we couldn't be happier. We've only towed a few times, but already the wife has taken over hooking up the tow bar while I hook up the Brake Buddy in the Jeep. Easy to hook up, just as easy to disconnect after you arrive. I wish we had done this years ago!

After owning another name brand tow bar and experiencing a. complete and catastrophic failure of one of the arms resulting in extensive damage and costly repair to both TOAD and the rear of the motorhome I discarded the remains and purchased a Demco Excali-bar. I couldn't have been happier. Being ever mindful of what happened in the past, I can now tow with complete confidence. It is easier to hook-up, is reliable and I have had no worry about any failure, My go to tow bar.

Everything arrived timely and well packed. Upon opening, all contents were there and in great shape.Extremely good service! I would order again from etrailer!

Really well built. Great service from etrailer.

On the road in our RV when I discovered our 3yr 7mo Blue Ox Tow Bar had a failure that I was not going to be able to use again. I call Willian S at etrailer about getting a new Blue Ox Tow Bar and having it shipped to a nearby UPS store. William checked to ensure it would be delivered before our scheduled departure. Not only did he assure me it would meet the timeline but he checked it after shipping to make sure it got here. Also he checked about a “like new” tow bar which saved me ~$500. Thanks for keeping me on the road without delay!

Demco has made MANY improvements over the original Excalibar I purchased 18 years ago. Some of the changes have been with the safety cables being better organized; the main 'towing' bolt being perpendicular to the towing pull tension; being able to adjust the assembly to accommodate a more level alignment between the powered and towed vehicles by 'flipping' or turning over the yoke. Also, it is much easier to store the assembly with the newer pin and plate arrangement, instead of the previous pin system which required getting on the ground and attempting to pin the shaft to secure the tow arms. In addition, the tow arms now have the ability to hold themselves up while you are in the process of disconnecting the tow bar from the powered vehicle. I have not towed my truck behind my motorhome as of yet, so I can't say how it will disengage and be non-binding on the arms for storage. One of the issues I had with the old Excalibar was being somewhat difficult to release and disengage after a trip. Hopefully, that issue has been resolved.

The Demco Excali-bar 3 is proving to be a great purchase. Having owned a previous model Demco, I am very pleased with the current model Excali-bar's new improvements!

The wiring kit for the tow base kit was very well engineered and works very well. The videos for installing the base plate we're awesome step by step process and was very easily accomplished by someone with just a wrench and a drill and a few tools.

Would have gave it a full 5 stars if it would have actually fit into the receiver. Tried both my extension receiver and the OEM 2 inch receiver. Would not budge. Had to grind off the powder coating and then some. Now I need to then repaint to prevent rusting. I would have returned this if I didn’t need it now. Better quality control is needed on the e trailer brand. Guess I know it won’t rattle, lol. Buy a mainstream brand.

I had a Blueox before and the Demco seems higher quality. The real test comes in few weeks when we use it for the first time. I know it will go well. Great tow bar and fast delivery. Thanks!

Used dolly before. The whole tow setup is awesome. Easy to connect and disconnect including lights and brakes. Would highly recommend.

etrailer has been just what I need it as a first time tower of a Rv tow car there experience and courtesy of helping someone with no experience has been a huge relief with something so important there help was invaluable all the way through Thank you so much

Very easy to use and handled as well as I expected.

Very rugged tow bar. You will need this cover: Roadmaster Tow Bar Cover Item # RM-055-3 because the arms don't lock in the short position so they just slide out to the extended lock position when stowed without a cover.

Have not used this yet but it gives me all the features I was looking for including the 1.5 inch lift . Note that the unit came in the lower position so if you need height you have to reverse the head. It is not that hard to do and just take your time and connect to the back end of the Rv to start the process.

First, this bar is extremely heavy, which makes transporting and maneuvering cumbersome and difficult. Secondly, I had issues with this unit from the get-go. I did not receive the correct bolts to attach the Roadmaster clevis to the arm ends. The instructions clearly state that a clevis bolt was to be installed with the XHD unit, but it was not in the hardware bag. I had to call customer service (which was so/so, almost like the person didn't believe me) and had the bolts sent to me. I received the bolts but long story short, they were too short. They did not come out of the bottom of the locknut and any attempt to torque them to the point they did protrude, caused the forks of the clevis to bend, which is too much stress on such an important piece. I did not feel it was safe to either have the bolts not protrude, or force them to protrude. Then came the days-long process of trying to rectify the situation. I called customer service and attempted to explain the problem to the rep. She didn't really want to hear my problem and I was quickly rushed off the phone and directed to call Roadmaster for support, which I did. Roadmaster, of course, has nothing to do with this bar, or problem (pictures were sent to RM) and I was directed to call eTrailer back. I spoke to another person and she was a little more helpful. However, during our "conversation," I could hardly get a word in (I was spoken over and interrupted constantly.) I was told that #1.) the first person I talked to had no idea what she was talking about #2.) Demco manufactures these parts, not Roadmaster, #3.) Essentially the correct length bolts don't exist in the parts catalog. At this point I am starting to get upset with my experience and just wanted a tow bar that worked. I was convinced to but a Roadmaster branded tow bar to avoid any more issues (Blackhawk All Terrain) which I found to be strange, I figured the margin on the eTrailer branded products would be higher, but I digress. Since there is no exchange program with eTrailer, I had to purchase the Blackhawk outright. I was given a UPS label to send the XHD back, but I had to wait to receive the Blackhawk to reuse the box, which is not a huge deal, a minor inconvenience at this point. As of today (4/26/24) I am still waiting for a refund on this unit which I was assured it would be on it's way once the tracking number showed that it was picked up by UPS, but this is not the case. In conclusion, the XHD seemed like it would be a decent product if they can get the hardware right (at least for the Roadmaster system) it's just heavier than most tow bars I have had experience with. eTrailer.com customer service can also use some work, I was not happy with the service after the sale I received. Oh, and the final kick in the tail, the Blackhawk does not come with safety cables. If this were my company, I would have thrown those in for the inconvenience, but I was offered nothing for the trouble this has caused, no discount on the Blackhawk, cables or anything. I will do all I can to avoid buying from etrailer again and will direct others to the same.

Was simple to install. The only hard part was installing the backing nut with the wire handle. That could be done different.

Good design but poorly manufactured. Used on a single, multi-week trip: Bar stayed on the RV. Removed when we got home and the powder-coating has cracked and bar is showing rust inside and out. Chrome on extending arms is pitted and beginning to rust. Emailed etrailer but Cody informed me that I would have to ship it back at my expense without any commitment to replace! Disappointed with etrailer after years of previous purchases

Instructions for the adapter were incomplete, with no instructions on whether to torque the bolts or leave with some play. Haven't used the tow bar yet, but easy to assemble.