Best 2005 Jeep TJ Trailer Suspension Parts

Product as described it was a perfect fit. etrailer is the best way to buy trailer parts. Superfast shipping and great costomer service.

Replaceing damaged parts on my flat trailer after the Campfire. Axles springs hangers etc were compromised by the tire’s catching fire. etrailer had all of the exact same parts at great prices. All shipped to my house. My trailer will soon be back in commission basically had to replace everything under the frame. Thanks etrailer

Very easy to install. Be sure to weld the top of the axle as stated.

The lift worked out perfectly,I had the place where I bought the trailer install them because I didn't have a welder to weld the saddle mounts to the axle and that's a must for a safe installation,also I had the place where I bought the trailer do it because they had the capability to align the axle perfect to the trailer after the installation. The lift added approximately 5 inches to the trailer hight so I could install the off road wheels and tires.The lift didn't affect the handling of the trailer at all.

Great kit! Installed this on my 1995 Jayco Fifth Wheel and it really improved the ride height with my truck. It’s been on 2 round trips from Texas to Montana since and many other trips locally with no issues.

It has worked great for lowering my boat trailer at shallow boat ramps. Don’t have to back half away across the river to launch or retrieve my Lowe Roughneck.

Excellent service and quick delivery and great price, all looks good, thanks for helping me out with these items that I can't find around my area anymore,AES

Bushings quiet the trailer for a short period of time. Bushings wear out and squeaks return quicker than I expected.

I installed these on a tandem boat trailer. No modifications needed. I am hauling a heavy fiberglass 22' boat and I like these heavy shackles. The old shackles had wore completely through. Because these bolts are locked to the shackles the pivot is on the bolt were it is designed to be spread out to the lubricated surface. This is better and stronger than the original. It is greaseable too.

Good quality kit, no missing pieces. My stock shackles were 1/4” thick with stamped holes so essentially 1/8” of bearing surface on the bushings. They wore out twice at about eight months each time. This kit has 1/2” thick shackles with machined holes so four times the bearing surface for the metal bushings instead of plastic. No issues so far and trailer feels steadier. I would reorder this kit when the time comes.

Arrived well packed and as advertised. I'm going to pull the azle out of the boat trailer and wanted to have this 'on hand' should I break some of my U bolts. I've bought from you before - always been happy, thanks

Bought these in conjunction with new springs and 48" axle for an old galvanized boat trailer (for a Hobie cat). Axle, springs and U-bolts all bolted together perfectly. Trailer is like new!

Great Item just as described. These bolts worked great and are hard to find in my area so etrailer.com was a good find. Same Day Shipping also.

Ideally, the shoulder of the bolts should be long enough to extend all the way through the spring and shackle so that the threads are not subject to load or moving parts. The treads are the weakest portion of any bolt and should only be exposed to tension, not sheer loads. This being trailer hardware, I guess that design factor is not a high priority. Just seems like it could be done right with just a smidge more effort or consideration. That said, the original bolts I removed had only a slightly longer shoulder and one-half the shackle was riding on threads and it held up for years, although it was worn considerably more in the threads.

Melissa T Provided excellent customer service. I Would recommend to everyone use etrailer.

Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!

These u bolts will work great for the boat trailer.

I ordered the ubolt kit for 2” square axle when i bought my new leaf springs. My old ubolts were 5 1/2”, the new ubolts were only 4 1/2”. Not long enough to use lock washer and thread bolt sufficiently. I had to order longer ubolts to make it work, only to find out 2 things. 1- the new longer ubolts do not include washers or nuts. 2- the 4 1/2” ubolts were fine thread while the new 5 1/4” are coarse thread, so i had to make the 6 mile trip to home depot to buy new coarse thread nuts. Why do you suggest a ubolt kit that doesn’t work with a 2” square axle and a 4 layer leaf spring

Excellent, had everything I needed and more for my trailer. Everything fit well!

I ordered replacement leaf springs for my trailer using the instructions provided by etrailer. The correct items were shipped and they fit perfectly! The mounting hardware was exactly what was needed. No extra parts were needed as in run to the local hardware store! The springs went in with no problems. I would absolutely buy from etrailer again as their customer service was excellent as was the products.

Detailed delivery information

Bought many parts, wheels & tires for a small horse trailer restoration project. Received everything purchased quick and all parts were perfect. Made the job go as smoothly as a 25 year old trailer restoration can go.

I really wanted to give this kit a 5 star review, however it fell short in more than one way. The parts are very nice and heavy duty looking and went together purrty good. However, when I went to grease the shackles none took grease it just came out around the fitting, so I changed the end on my grease gun thinking it was just worn out, still same problem. I had to hold the fitting on the zirk as hard as I could and finally got them to take grease, one still hasn't taken grease and not sure what I'm going to do. I left all hardware loose to this point to make sure there was no un nessesary pressure on anything hoping it would take grease easy. It's like the heads of the zirks are a size to small. After greasing everything the best I could I tightened everything up, during this process I had 2 nuts that the threads pulled out of... Just as they got tight they started to loosen up, I was using a standard length 1\2 drive craftsman ratchet, and I'm not hulk. I ended up having a few nuts and washers that worked but still this shouldn't have happened. Makes me wonder about the rest of the metals strength. Looks heavy duty but I'm starting to wonder about longevity.

After receiving my shipment yesterday, I was concerned that parts may have been missing due to the shape of the shipping box and the lack of packing material. During the installation of the shackles, the third shackle nuts/bolts stripped out when tightened by hand. The shackle had to be cut off since the nuts could not be properly tightened. I have emailed etrailer with this issue and hopefully we can resolve the issue quickly.

I won't shop anywhere else! Excellent customer service. Huge selection. Prompt delivery. Everything I needed for my custom flatbed trailer (single axle,7000#).

Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.

Overall, the brackets are as specified and appear to be a quality metal. I’m not sure if it’s by design, but the inside width of the legs at the bolt holes are slightly wider (1/8”) than the inside width at the top at the bend. But I guess that is better than it being tighter to get the leaf spring into it.

I only received the spring hanger, but not the suspension kit both ordered and picked at same time. I’m still waiting on the moride suspension kit

Brandon was very knowledgeable about what I would need to replace my axles and springs, right down to the sizes for bushings and bolts. I have been using trailer for many years because their service is awesome.

Excellent service and prices. Needed to replace curved equalizer, shackles and bolts, nylon spring bushings, u-bolts, and wheel bearing seals on my sailboat trailer. etrailer had everything and shipped it fast. Staff at etrailer was excellent!

Your knowledge of the parts was excellent my trailer is an older model and I was concerned on receiving the correct parts. Thankfully they are a prefect fit and the delivery was right on time. Thanks John

I think that the one pictured is nice and shinny black And the one I received is rusty

Brackets came not bent enough and bolt nuts are oval shapped and won't thread because of this. Pretty disappointing I will call customer support soon for replacement

Kit is supposed to be for 1-3/4" springs but the center hangers were for 2", they said they would reship but after a week it still hasnt shipped out. Looks like fair quality stuff just packaged wrong in China!

Added a third 7000 lb axle to our 14000 lb trailer. Easy to install, fit perfectly. Handles the weight better.

If I were to rate this product I would want to say it was better than excellent. Very impressed with your products. definitely beyond my expectation. If fact I ordered brakes for the trailer the very day I received slipper springs kit.

Great fit. I called to ask what I needed and etrailer made the right suggestions. Fast and friendly service for you trailer needs.

When the first package came, there were parts missing. I contacted the company, and they immediately corrected the issue. Thank you for caring about your customers.

I think etrailer is Great. I think their customer service is fantastic. My wife and I were in Arkansas, 1200 miles from our home in Ft. Myers Florida. I replaced the original springs on our trailer with new heavy duty springs, but never changed the hangers or bolts. Our trailer was riding very poorly, we needed new hangers and bolts badly because we were headed on a very long 9000-mile trip with many stops all the way to the Monterey CA. etrailer found us a UPS Store along our route to send us the parts that we needed. Many thanks to etrailer for great parts and Fantastic customer service and for helping us with our most Wonderful Adventure!

Excellent quality. Far better than the ones I had to cut off my utility trailer (one of the old ones was broken).