Summer Starts Here - Save up to 70%
# 1
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Easy install
Super fast processing and shipping. Item was delivered less than 48 hours after placing order. Worked perfectly for providing needed clearance between trailer and spare tire on back of Jeep Liberty.
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Purchased hitch ball, ball mount, hitch extender, wiring extension, safety chain extension, and storage bags for a Jeep Liberty. ETrailer has a great selection of products, with good prices, and fast shipping. We will definitely buy from them again. We have not had an opportunity to use the items purchased, but anticipate no problems.
Works perfectly on my Jeep Liberty. Excellent finish and weld quality.
# 3
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
GOOD, STRONG PRODUCT. WAS ABLE TO MARRY UP MY BALL MOUNT AND HITCH BALL TO MY RECEIVER. VERY HAPPY.
Product came through exactly as advertised and it is of high quality. Fast service with prompt delivery. The sales lady was very helpful and knowledgeable with the three products I ordered. I recommend using etrailer for your trailer parts.
# 4
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
GOOD, STRONG PRODUCT. WAS ABLE TO MARRY UP MY BALL MOUNT AND HITCH BALL TO MY RECEIVER. VERY HAPPY.
Product came through exactly as advertised and it is of high quality. Fast service with prompt delivery. The sales lady was very helpful and knowledgeable with the three products I ordered. I recommend using etrailer for your trailer parts.
# 5
etrailer Ball Mount Kit - Super Extra-Long - 3/4" Rise or 2" Drop - 6,000 lbs
It a hitch ball mount , well made
Great price good product
# 6
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
Perfect size for a 2004 Jeep Liberty with spare wheel on back. Very nice quality. I can now mount my trailer hassle free.
Just what I needed for our Jeep. Long shaft bar to get beyond spare tire. Good quality, fast shipping, good deal.
# 7
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 8
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 9
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Went in just like it was supposed to. Quick shipping as always.
The exact part number my hitch called for. The salesperson Lisa, was extremely friendly, and made the ordering process, as smooth as possible. Thank you for your great service etrailer.
# 10
Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs
Good prices, always a pleasure to deal with! Great folks.
Haven't used it yet. I bought it because of CURT's quality. It was beat up in shipping though.
# 11
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
Purchased this hitch as a companion for our Reese anti sway control. The small ball for the Reese sway control fits in the bracket and the 2” drop on the hitch is exactly what we needed to have our Jayco camper level when towing.
# 12
Gen-Y Torsion 2-Ball Mount - 2" Hitch - 2-1/2" Rise/5" Drop- 16K
First impression massive, heavy Built Stout. My truck is always hooked to a trailer so I figured I would try a nicer set up I was using the B&W which is great for the average Joe that just needs to pull a trailer every now and then but this is a whole new world first trailer I pulled with It I could feel the difference right away it was smoother the vibrations and harsh thump feelings that I would normally get when pulling the trailers when I hit rough roads or bumps was not as bad or gone. It definitely made a huge difference super easy to move height if needed and an added bonus I didn’t think of is that it pushes the trailer back further so you can get a little tighter turning when backing up if needed and i can open the tailgate and it won’t hit the jack on the trailer. On top of that when people see it it’s a conversation starter There are not many of these out there so they are intrigued by the size and how it works. Bottom line in my opinion if you’re towing all the time it is worth the investment. I would invest in another.
Built like a brick s@%thouse. Works great! Keep in mind I use this for pulling same trailer loaded same way every day. I could figure out optimal hitch weight and keep it there
# 13
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
The hitch and the trailer ball with the hitch was perfect for making my trailer level behind my vehicle
Shipping was a mess, lost the first one in the mail somewhere because no one thought a 50# hitch would punch through cardboard. It is working as expected, but does not seem to be a true 2" drop.
# 14
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
eTrailer is the best! Fast ship and no problems I'll be using the heavy duty hitch to haul my 5,500 lb boat and trailer from Texas to Michigan this spring.
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
# 15
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 16
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
This item is exactly as described and the finish is top of the line. The case makes it handy to keep your towing accessories stored until you need them. I have had nothing but the best service on every order from etrailer.
Great locking mechanism
# 17
Curt Class III Ball Mount with 2-5/16" Ball - 2" Drop - 7,500 lbs
GOOD, STRONG PRODUCT. WAS ABLE TO MARRY UP MY BALL MOUNT AND HITCH BALL TO MY RECEIVER. VERY HAPPY.
Product came through exactly as advertised and it is of high quality. Fast service with prompt delivery. The sales lady was very helpful and knowledgeable with the three products I ordered. I recommend using etrailer for your trailer parts.
# 18
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
GOOD, STRONG PRODUCT. WAS ABLE TO MARRY UP MY BALL MOUNT AND HITCH BALL TO MY RECEIVER. VERY HAPPY.
Product came through exactly as advertised and it is of high quality. Fast service with prompt delivery. The sales lady was very helpful and knowledgeable with the three products I ordered. I recommend using etrailer for your trailer parts.
What our customers are saying:
"wow, that was fast! So far everything looks great. Good price, fast shipment and great follow up."