# 1
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 2
Curt Ball Mount for 2" Hitches - 8" Rise, 9-1/4" Drop - 14" Long - 5K
This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.
# 3
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
I was not sure that the 8-3/4" rise was going to be enough, I followed your instructions on how to measure the rise needed and it was the perfect height. Thank you
Works great. Needed the drop to tow a utility trailer at level.
# 4
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Well built. Make sure you buy the pin separately, as it does not come with the receiver - which I thought would make sense.
It does what it looks like it does. We use it upside down to raise the hitch on our 2005 Honda Odyssey.
# 5
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
I ordered this extra length ball mount to keep the back end of my Honda Odyssey out of the water when I launched my boat. It does exactly what I wanted. It connects with the hitch I purchased from etrailer last year. Going to etrailer was my first step when I realized I needed additional length. I wish that more Internet companies had the service I get from etrailer. John Boddie
Great!
# 6
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
I was not sure that the 8-3/4" rise was going to be enough, I followed your instructions on how to measure the rise needed and it was the perfect height. Thank you
Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!
# 7
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Very please with the purchase. Solid construction and raised the overall height of the receiver hitch on my Honda Odyssey with added ground clearance. Excellent service/shipping from eTrailer as usual.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 8
Draw-Tite Ball Mount - 9-3/4" Rise, 11" Drop - 9" Long - 3,500 to 5,000 lbs
I made the purchase as a gift, so I have no feedback on the items at this moment. The service was excellent, and the upgrade in shipping arrangements a real plus.
Well built. Make sure you buy the pin separately, as it does not come with the receiver - which I thought would make sense.
# 9
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 10
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
The trailer hitch ball mount fits great. The floor mats for on the 2016 Honda Odyssey fits nicely and the color choice turn out nice.
Love the hitch, ball mount, ball and wiring harness. All were a breeze to install.
# 11
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 12
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
Purchased this hitch as a companion for our Reese anti sway control. The small ball for the Reese sway control fits in the bracket and the 2” drop on the hitch is exactly what we needed to have our Jayco camper level when towing.
# 13
Curt Ball Mount - 6" Rise, 8" Drop - 11-1/2" Long - 5,000 lbs
This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.
# 14
Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs
Well built. Make sure you buy the pin separately, as it does not come with the receiver - which I thought would make sense.
The trailer hitch ball mount fits great. The floor mats for on the 2016 Honda Odyssey fits nicely and the color choice turn out nice.
# 15
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
This long-shaft ball mount enabled me to fully insert and pin the shaft and get the rise I needed for towing level a Yakima Trailer by a 2015 Honda Odyssey. The typical, shorter shaft was not long enough for complete insertion and pinning of the shaft because the welded on arm-support piece hit the bumper.
This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.
# 16
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.
# 17
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.
# 18
Draw-Tite Ball Mount - 6-3/4" Rise, 8" Drop - 10" Long - 5,000 lbs
Great website, very informative about each product. The how to videos make the installation of the product easy to understand. Product was delivered on time and undamaged. This product was installed on a 2016 Honda Odyssey, with the low ground clearance of a mini van I needed a hitch that would set my trailer to the correct height to make my trailer level while towing. this product corrected that issue for me.
Well built. Make sure you buy the pin separately, as it does not come with the receiver - which I thought would make sense.
What our customers are saying:
"This has been one of my best experiences in on-line shopping. While ordering I had a question. I called Customer Service and they very quickly had the information that I needed. I also was blown away at the speed of the order being shipped...same day as ordered and I ordered late in the afternoon. You do not find this type of service everywhere !! Thanks"