# 1
Ultra-Fab Ultra Scissor Jacks - 24" Lift - 13,000 lbs - Qty 2
Very easy to install went right in place of the two support jacks that were broken just removed the existing self tapping screws and one bolt and the job is complete.
Just what I needed great quality and even better price. Fast shipping arived in 5 days all the way across the country.these are great jacks at a great price I would definetly by these from etrailer if I ever need them again.
# 2
Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer - Steel - 31" to 54" - 5,000 lbs
I was quite surprised that the Tripod helped so much in stabilizing our 5th Wheel. I was a bit skeptical, but I am very impressed with how well it works and how quickly it was shipped. We ended up buying an extra lock for $12.00 to get "free Shipping"(which would have been $19.00). Win win...
Great service - I have ordered several things from etrailer at different times and I have always been very pleased. I just tried this stabilizer on my 5th wheel and it looks like it will do the job. I will know better in a couple of weeks after our next outing but for now I am very happy with it.
# 3
Landing Gear Set - 36-1/2" Lift - 8,000 lbs
The gear box is the higher quality metal (aluminum) kind. If you have plastic it will be a big upgrade. The telescoping square connecting shaft that goes between the legs is a noticeably much thicker steel than the OEM one, though it is not painted and does not seem to be galvanized. I wiped it down with a thin coating of WD-40 to prevent rusting. The legs themselves are much the same as the OEM lippart legs that I had but with a few added features. These legs have an easy to remove top plate that is secured with screws (OEM had roll pins that had to be punched out). They also have grease zerks for the gears and the lead screw. There are tapped holes on either side of the leg so that you can orient the zerks for easy access no matter what orientation your rig calls for on installation. There are plugs that go in the unused holes to keep grease from squirting out. This is a huge plus. The main reason that people have problems with landing gear legs is because the lube dries up and the legs seize or become difficult to actuate or the gears get stripped. The only negative thing that I have to say about the legs is, they have a little more play than the OEM ones (inner leg that sleeves into outer leg has a little play). This is not a problem for me because I have stabilizer bars connected to them. But it could bug some people because it would add slightly more shake to a rig with no stabilization. If you want to replace some aging legs that don't work well this is a very good high value way to do it. Knowing what I know now, because etrailer has such great high value parts, I would buy two gear boxes Item # RVLG-RDBOX, two lead legs Item # RVLG-LEGL, two motors Item # M1230 and a second switch # LC138415. This setup would require proper wiring and fusing for the second switch/motor but would give you dual drive and front leveling capabilities.
These worked great and were a good price.
# 4
Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs
Received items earlier than scheduled. Pretty easy to install. Went with RV switches instead. Sounds good and they move up and down with ease. Will do a update later for long term results. Believe it's a great investment. It's on a 2018 toy hauler 40ft. Factory legs barely worked it kept slipping going up .F.Y.I . they say the back up way is to remove motor on top to manually operate it.
# 5
Ultra-Fab Ultra Scissor Jacks - 30" Lift - 13,000 lbs - Qty 2
Just as described. Appear to be of very good quality.
Very easy to install went right in place of the two support jacks that were broken just removed the existing self tapping screws and one bolt and the job is complete.
# 6
Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2
Great directions for manual assembly, quality metal and parts. Solid and exactly the heavy duty I was looking for to use with my slide in truck camper.
The Brophy jacks were strong, stable, easy to position, and easy to lift and lower my camper. it is a much better method than having four jacks to maneuver. And it cut down my time to 30 minutes total to load my camper instead of an hour and a half! I have to start from my garage and winch my camper down on a cart to the street face because of the incline driveway is so dramatic and my camper won’t fit in my garage if it is attached to the truck. I couldn’t be more happy they were great and now I have my truck loaded with my very modern camper and I’m enjoying quite the holiday! I’m using the 3 ton 67 inch trophy jacks and I’m lifting an 800 pound gross camper. The stability is outstanding.
# 7
Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2
Easy to install and use. Adds stability over factory installed jacks. Quality is good.
these are very well built.
# 8
Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel - 37" to 50" - 5,000 lbs
Delivery was incredibly fast( within a couple days!). Like other reviews, I was very please how good the stabilizer minimized movement on our 5th wheel camper. I have made several purchases from etrailer.com and have been satisfied each time with prices,product and speed of delivery! THANKS
We have had for a year now and has done what we wanted it to do. This has made our camper so much more stable for us.
# 9
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad - 4-Point Set
Installation would have been a breeze, but my trailer had a completely sealed under side which offered some challenges. That’s nothing to do with the product. The jacks are amazing, makes setup very easy with the push of a button. Should have installed these years ago.
appears to be very well made as i unboxed. in the process of installing. etrailer honored their low price promise. also got free shipping. i will be buying more stuff from them.
# 10
Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4
These Jack's made both building and positioning my teardrop onto the trailer bed easier. At campsites they easily level the trailer. So yes I'm happy.
we are using these stabilizers for supporting our offloaded truck camper (adventurer 910db) where we reside full-time ... they are very easy to use, provide excellent support for the truck camper and have eliminated 98% of wobble ... the support structure includes jack pads, e-trailer stabilizer, 2x6 pressure treated lumber, 4x8 3/4 inch pressure treated plywood
# 11
Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1
Perfect fit for my Pull behind Motorcycle trailer project. Looks solid and fast shipping! Thanks etrailer!
Excellent product, I can't wait to install it and try it out. So far it seems very strong and capable on Do it what it was design to do.
# 12
Ultra-Fab Ultra Scissor Jack - 24" Lift - 6,500 lbs
Great, it matched up to where old one was
Great fit
# 13
Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs
This is replacing a Bulldog jack that's 22 years old and was recently stripped out. It will be a huge improvement. The shipping was fast, and the product showed up very well packaged. I'm looking forward to welding it on this weekend.
# 14
Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors - 30" Lift - 6,000 lbs
Good product! 3 day delivery, no missing or damaged components. 2 hour install...an extra pair of hands is very helpful. I completely assembled the device, left all fasteners a litle loose, slid underneath my 36' trailer. Set width beforehand plus one half inch using jack legs to raise against trailer frame then adjusted finish width. Sure makes life easy for someone with physical limitations.
Finally got around to installing my PT II Stabilizers 30" front and rear of our 26' Surveyor. Pre - assembled them to make sure they went together ok. Luckily I had two sources for power front & rear which made wiring easy, I used a Buss block to make all positive connections, grounds straight to frame, soldered all connections and heat srinked to seal. Using the 3/8" self tappers was fun.Well got it all together and all works well makes trailer very stable, don't have to worry about scissor jacks collapsing anymore.
# 15
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs
Product was exactly what I needed. We only had to make one modification to the legs so that we did not have to weld in the new straps. Works perfect. I would love that it instructions would have shown the picture as if you were facing the equipment.
Product was an exact fit for my application only problem I had was key inside gear box fell out but easily fixed once I figured it out.etrailer was spot on helping me find correct jack for my ca.per works great
# 16
Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1
This was a perfect replacement for a damaged jack. This is a quality product for a very fair price. This is not my first order with etrailer.com and will not be the last. Every product I have ordered is high quality and shipped quickly. I am never disappointed.
Cathy T was most helpful with all my questions. I ordered the RAM 2,500 lbs. jacks to replace my OE jacks on my 2018 Sonic 200VML TT. My OE jacks BAL were poorly designed ,and cheaply manufactured using very thin materials (flimsy) , The RAM jacks use thicker materials ,and bolts in manufacture. RV does not wobble now.
# 17
Lippert Scissor Stabilizer Jacks with Handle - 30" Lift - 10,000 lbs - Qty 2
Deception in advertisin It may be my fault for not reading to total description in detail rather than glancing over it. Similar products from other companies list the weight capacity as each but this product lists the 10,000 pound weight capacity as both. They are only good for 5000 each. The [online] option was at least 6000 pounds! The only reason they were not returned is the 30in capability.
These worked out great easy to install with the circular mounting plate.
# 18
Bulldog Tandem Landing Gear Set - Drop Leg - 36" Lift - 8,000 lbs
Delivery was on time, but the box it arrived in didn’t fair we’ll and parts were hanging out of the box! But everything was accounted for and the parts were well wrapped. Installation was very easy. The only issue was the locking pins mount plate is tack welded to the primary leg that the motor moves up and down. Those mounting plates had to be removed to install the lead and follow jacks. A grinder made short work of that. I didn’t put the mounting plates back on, instead I used my spring loaded pins that were on the old legs, they were still in good working condition. Also I didn’t use the adjustable cross over rod that came in the package . I opted to use the one that was on my old jacks, it was constructed of heaven gauge tubing and didn’t have a much (slop) movement in it. Also did not use the plastic housing gear box, I purchased a aluminum house gear box from e-trailer a few months back and used that one keeping the plastic for a spare. Very satisfied.
The leg pin came out because of the design, it is not a strong locking mechanism to not pull it all the way out. (My wife pulled it all the way out) Afyer furthet inspection, in addition to poor locking mechanism, the size of the pin is not adequate for the specified weight of the jack.
# 19
Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
Seems to be good quality, perfect replacement for the 30+ year old Attwood landing gear that wore out. Installation was fairly quick and easy, with two small issues. First, had to sand down a plastic spacer between gear box and drive bar for bolt to fit. Second, I have to replace the screws that hold motor to gear box, threads on new gear box start 1/4 in back making old screws too short. I was impressed that the jacks have two grease zerks and came well greased.
After one side of my landing gear failed I looked a lot of places for a replacement. etrailer had the full set at a lower price than others had for just the one leg. Reasonable shipping times, everything arrived safely. Best price at least for this item.
# 20
JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ 58" or More Between Landing Gear
This was a great buy. Much more stabilization in our camper than before. We are very pleased with the product.
Very pleased I made this purchase. It has totally changed the stability of our fifth wheel. Very easy to install and well made.
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."