To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
If you want your vehicle to keep its factory look when you’re not towing, this setup does the trick. The invisible design leaves no bulky crossbar or protruding brackets in sight, and the removable arms keep things tucked away when not in use. The included high-density polyethylene covers snap into the receivers to block dirt and debris, so the tabs slide in and out smoothly every time you hook up.
Connecting your tow bar is simple and quick. Each arm slides into the base plate receiver, twists to lock, and secures with the included safety pin for an added layer of security. When it’s time to disconnect, just pull the pin, twist, and remove. With this twist-lock setup, you get a smooth connection that stays put mile after mile.
This base plate bolts directly to the chassis and spreads towing forces evenly to help reduce stress on suspension components. The sturdy steel build gives dependable strength for long trips and rough roads alike. No welding is required, and all necessary hardware comes in the box for a solid bolt-on mount that you can trust over thousands of towing miles.
Already have a tow bar setup you like? You’re covered. This base plate works with all Demco, etrailer, and Blue Ox tow bars without needing an adapter. If you’re running a Roadmaster tow bar, just add the correct adapter (e98983, e98984, e98979, or e98981—sold separately). An electrical bracket is included so you can easily mount a round connector plug for a tidy front-end wiring setup.
If you prefer to do your own installs, this kit is designed for that. It mounts securely with bolts—no welding required—and includes detailed instructions along with all necessary hardware. The bracket spacing is 33" and bracket height is 21", giving clear reference points for planning your setup. It’s a hands-on project that most enthusiasts can complete confidently with basic tools.
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
Ratings & Reviews
Very easy to install and I love the finished look. However I had to cut a couple of relief points in the rock guard in order to get the back two screws into place. Without these the rock guard would bind against these points on the base plate and not allow the rock guard to travel back far enough to reattached the screws. I have a 2025 Jeep Wrangler Sahara.
This is a great base plate, it really looks good and integrates well with the front of the jeep.
Easy installation on my F-150. Videos on website are very helpful.
They were easy to install and came with good instructions and pictures. This is the second vehicle I have installed this product on and etrailer is my go to.
Relatively easy install. Double check the skid plate templates. I had to change mine significantly, not just holes but slots from the top all the way to the bottom of the towbar. In the end, they look great they install well. Very nice system.
Heavy duty bracket. The included bracket for the electrical is also heavy duty.
Mounted on a 2025 Bronco with modular bumper. I did have to do a little additional cutting on the bumper to make it fit.
Easy installation if you watch the videos on the etrailer website.
I like the fact that this base plate is hidden behind the air dam below the bumper.
Install of the baseplate itself was not difficult and went smooth. The templates to cut out the holes in my plastic shroud were not accurate. It took some additional trimming to get right and I found that a bit frustrating.
I have installed three base plates on my vehicles. All have been purchased from trailer. They have all been rather easy to install just a matter of taking the time it takes. On this last one mounted on my 2024 Ford Maverick I recommend adding to the instructions an easier way to unplug the light plug from the front facia. I think it is much easier if one turns the wheel full left and unplug the socket before pulling the facia. Easier than current instructions that say be careful when pulling the facia since the plug needs to be undone. I was able to do the whole thing by myself this way and not needed someone else to hold the facia while disconnecting the plug.
Nice setup. Instructions were little off for my application (2026 with shutters) Shutters had to be removed to install correctly. Instructions did not cover this. Everything fit as it should. Final product very satisfied.
2025 Ford Mavrick AWD Hybrid. I have installed 2 base plate kits on Honda CRVs.
Piece of cake. Remove front cowling..install base plate..done. Not so on my 2 day old Mavrick. 1 add a spacer to move kit away from shutters...adding washers is super poor planning on manufacturing's part..2 you don't have to go up & over in the middle now 70% of the condenser air flow is blocked by welded steel..could have been much better. 3 provide a mounting ring or hook...wrapping a safety cable around sheet metal components is silly Engineering.
Installation on a 2018 Jeep JL Unlimited Sahara went well, no surprises. Attaching the base plate to chassis safety cables required some ingenuity as the instructions were useless in this installation. Etrailer should post some actual installation photos vs. a poor generic diagram.
Easy to install and works like should. I put a aftermarket bumper on as well so it was simple with no issues to install I have pulled it over 6000 miles and a lot of one nighter stays. It is simple to hook up and no issues pulling.
Came very well packaged, looked great very well made and heavy duty.
Instructions could have been better.
Template for air dam cutout just a rough starting point you will need to do more trimming for proper fit. Overall very happy looks great and very solid.
I've bought from e-trailer several times and I'm always happy with my purchase. The base plate and tow bar are of excellent quality and a good price. Installation was as not too bad; I watched the installation video for my truck even though it was for a different base plate. It gave me enough information to get the job done.
Very good product, easy to use with never a problem.
I have had Blue Ox and Roadmaster baseplates and the quality of these baseplates are far superior.
Functions perfectly, however, I wish adjustments could be made to it so you do not have to cut out grill to install
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.