To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
If you like a clean, factory look when you’re not towing, this setup delivers. The tabless design keeps the front end free of bulky brackets or a crossbar, and the drawbar tabs stay on your tow bar instead of sticking out from the vehicle. When not in use, snap on the polyethylene receiver covers to keep dirt and debris out so the arms slide in smoothly next time you hook up.
Connecting is fast and simple. Slide each tow bar arm into the base plate receiver, twist to lock it in place, and secure it with the included pull pin. The design saves time when you’re setting up alone and adds confidence that everything is properly latched before hitting the road. The distance between brackets is 25-7/8" and bracket height is 16-3/4", giving you solid reference points for your tow setup.
This base plate bolts directly to the chassis—no welding required. Its sturdy steel build spreads towing forces evenly to minimize stress on the suspension while maintaining a strong, dependable connection through thousands of miles of travel. It’s a solid piece of hardware that’s meant to last.
Already running a specific tow bar? No problem. This kit works directly with Demco, etrailer, and Blue Ox tow bars without an adapter. Roadmaster users can add an adapter (DM9523036, DM9523062, DM9523014, or DM9523023, sold separately) to make it work seamlessly with their existing gear. The built-in electrical bracket makes it easy to mount a round plug up front so your wiring stays tidy and ready to connect.
If you like doing your own projects, this setup is designed for straightforward home installation. It uses existing chassis points for a bolt-on fit, and all hardware and instructions are included to guide you step-by-step. Once installed, it’s permanently mounted and ready whenever you need to tow again.
Ratings & Reviews
This does not fit my 2025 ranger. I attached are a few images of the mounting location for the 9519343 base plate on my 2025 Ford Ranger with the Lariat trim and the 2.7l v6 motor. The aluminum colored piece interferes with the horizontal bar connecting the actual base plates. The base plate mounting holes are 31.5" apart, whereas the receiving nuts on the truck frame are 30.5" apart. I am returning this and have ordered a Blue Ox base plate.
Decided to have a shop install it with the electrical and break components. No regrets. Works great.
Great product, great finish, installation went great. Not happy about cutting holes in my air dam, but it hides it nice. Only complaint is I think the template to cut the holes out needs to be adjusted. I’m sure I placed them correctly and they are tight against one side and a big gap on the other. I’ve included pictures.
Well had to modify the baseplate. Gladiator Mojave X has oil shocks and the canisters are in the way of the baseplate. Had to cut about and inch off. Other then that perfect.
I installed this base plate kit on my 2021 Jeep Cherokee. I have not had any problems it has worked very well.
Bottom bolts seem kind of a weak install in my opinion, I was able to put my facia back on with not cutting so that was good.
Great fit and heavy-duty product.
This is the third Demco baseplate I've purchased for three different tow vehicles, all were exceptional quality with very clear instructions as you can see in the photo it was a very involved install. Thanks for a very good product at a great price.
The face plate fit very well on my 2024 Jeep Grand Cherokee L, Overland. Even though on the Etrailer website, it says it will not fit, but it definitely does. The instructions are a little vague about which way to turn the center crossbar. In my case, I had to turn it upside down from how it shows in the parts layout on the front page of the instructions. Also the photo below showing the installation without the bumper cover on, has it the wrong way for my vehicle. I turned it over after I took that photo. I opted not to cut up the lower honeycomb grill and just leave it off, which allowed me to install the 6-pin connector and the breakaway switch very neatly with the supplied bracket. And if I ever remove the face plate, I can put back the original honeycomb grill and the vehicle will be 100% back to as purchased. I did not have to drill any holes whatsoever for the installation.
The quality and fit up was great, the only comment is the safety cables are too short and not able to use them. If you are looking at this product i would recommend it, just keep in mind you have to buy cables
Quality product with fast free shipping. Although it arrived with damage to the box from the baseplate moving around during shipping, there was no damage to the baseplate itself. Installed relatively easily according to the instructions.
Product seems very well designed and manufactured. Minor reaming of a couple of the holes was needed to align with truck frame. We used it with a Blueox tow bar so towing was flawless. I highly recommend this base plate.
This was NOT the easiest install. Lots of grinding and cutting of stock parts. Then the effort required to align all the holes after said grinding and cutting took considerable effort. eTrailer needs to do specific video on this product so buyers know what to expect. I can say this product is worth the effort but boy oh boy know what you’re getting into.
Very easy to install except for one item. The core support bolt holes need to be moved out about 1/4 inch. Had to trim the hole on the plastic shutter surround. Otherwise great fit on 2026 Ford Ranger. I’ve done many of these and this was the easiest. Price is definitely too much. Haven’t towed with it yet but looking forward to it.
Now that I have actually used the tow bar and base plates I am very happy with my purchase. Sets up easy and when not in use the cover plates make for a great appearance on the truck.
Order was shipped and received timely. Both products purchased look to be well made. Haven’t installed yet currently using a demco set up on a 2001 Cherokee sport. Up graded to a 2020 wrangler needing a new base plate and lighting. Eager to install on the new buggy!
Lock tight both TUBES hard as a rock.
YOU Don't need lock tight at all as all threads in the nuts are lousy and no way to hand start anything. Had to run 4 or 5 bolts through each nut with an impact to free them up a bit. They should have piolet starter on each bolt and all threads should be clear enough for a hand start. This kit worked well as it does not require the bumper to be removed. BUT: LOUSEY BOLTS AND NUTS ADDED AT LEAST 30 MIN TO FIGHTING EVERY BOLT TO GET IT STARTED. 5 STARS FOR THE KIT. 1/2 STAR FOR THE BOLTS WITHOUT PIOLET AND NUTS THAT CAN NOT BE HAND STARTED.
Straight forward install. I have towed the Maverick about 7000 miles with no issues. The pins are a wee bight tight when mating to my Blue Ox tow bar. But that is loosening with time. A nice improvement would be a heavy duty mount for the umbilical plug
I use only Demco baseplates as they are the only brand that mount with no cutting or drilling. The Excalibar tow bar is very well made and handles my Jeep Gladiator with ease. It's also very simple and easy to hook and unhook. The excellent "how to" videos from etrailer sure helped me make the correct purchase decision.
Was able to install without issues using 2 washers between base plate and the upper brace and none on the bottom, otherwise followed the video. Works great!
Just installed the Demco Tabless Base Plate and included 6 pin wire bracket. It was very straightforward and anyone who is a little mechanically inclined, can do it with ease. The etrailer video was incredibly helpful. I followed it step by step and had no issues. I love that it is a direct bolt-to-frame base plate and does not need any modifications. I spent a bit more time cutting out the gravel guard to form-fit the tabless connectors. The adapters are sleek and blend right in to the front end. Love how it turned out.
I would give the tow bar a minus numberif possible. I bought it in hopes of not cutting up the shutter housing on my 2025 Maverick Hybrid. Well the bolt holes did not line up. I spoke with the Demco Engineers about the issue and they said that I must have a bent frame. My vehicle was two weeks old from the manufacturing date and all the rest of the pieces in the front assembly fit perfectly from Ford. I lad less then 200 miles on the unit. I made some cuts in the bar to allow more movement with the approval of Demco and still I could not get the front facia on. I called installers and they said they just cut away whatever is needed to get a tow bar on. None that I talked to at 3 places had as yet done this model installation. E trailer accepted my return and I put a roadmaster bar on.
I gave this 5 stars based on design and durability.Installation, however, is somewhere between 3 and 4 stars. Installation can be a real challenge, and even the best back yard mechanic might be a tad frustrated. The biggest problem in installation is NOT installing but getting ready to install. Removal od the tow bar hooks took more time than installing the base plates. We're talking a 2018 F-150 XLT Sport 4X4 crew cab. The pics show the finished product and the location of the safety can\bles.
Easy installation !
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.