See what our Experts say about this CURT Trailer Hitch Ball Mount

• Trailer Hitch Recommendation for Mini Clubman 2012
  For a 2012 Mini Clubman the recommended hitch is the Curt # C11387 which is a confirmed custom fit. This also fits 2011 model. This hitch has a 2,000 lb towing capacity which you'd need to stay under that weight and the towing capacity for the vehicle listed in the owners manual. I attached an install video for this hitch as well. For a ball mount you'd want the part # C45552 and for trailer wiring part # C59236.
  view full answer...
  
• Recommended Ball Mount for a 2018 Infiniti Q50
  The best ball mount for towing a jetski with your 2018 Infiniti Q50 is going to be the Curt Class II Euro Style Drawbar with 2" Ball item # C45552. A Euro-style drawbar is a one piece unit, with the trailer ball permanently welded to the drawbar. It will give you a 3-1/2" rise from the top of the shank to top of ball. This will be helpful considering how low to the ground the Curt Trailer Hitch item # C11407 sits. You will also need the Curt T-Connector Vehicle Wiring Harness item # C56248...
  view full answer...
• Can Hitch Ball Size Be Changed Out on Curt Euro Style Ball Mount
  Thanks for reaching out, John! The Curt Class II Euro Style Drawbar # C45552 has a 2" hitch ball. The hitch ball is fixed and can't be removed so if you want this style and you need to be able to use both a 1-7/8" and 2" hitch ball you'll need to also get the part # C45551 so you have 2 different ball mounts. For an alternative solution I recommend pairing the Curt Class II Drawbar # C45521 with the Convert-A-Ball Interchangeable Ball Set # 802b which gives you a way to swap out the hitch...
  view full answer...
• Recommended Ball Mount for Harley Davidson with 1-1/4 Inch Hitch Receiver
  We currently do not carry any stainless steel or chrome ball mounts for the 1-1/4 inch receiver size. We do however have many options that have the black power coat similar to the frame of your Harley Davidson and chrome hitch ball options to give you that chrome accent. I recommend the Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs # C45147 or the euro ball style ball mount # C45552. Both of these give you a 2 inch hitch ball. If you want the 1-7/8 inch...
  view full answer...
• Trailer Hitch For Towing a Jet Ski With a 2012 Toyota RAV4
  Yes, the Curt Trailer Hitch Receiver # C12108 has been tested to be strong enough to tow 3,500lbs with 350lbs of that being tongue weight, which is plenty for a jet ski. This exceeds the rating on your 2012 Toyota RAV4. If you have the V6 your tow rating is 2,000lbs or with the Inline 4 you will be able to tow 1,500lbs. You will want to ensure that the jet ski and trailer with all the gear you will carry do not exceed the ratings given by Toyota. I recommend the Hopkins Plug-In Simple...
  view full answer...
• Hitch, Wiring & Ball Mount for 2012 Chevrolet Equinox
  The Curt Class II Euro style ball mount/ball # C45552 that you referenced will fit in Class II hitch receiver # C12291 from Curt. This hitch is a confirmed fit for your 2012 Chevrolet Equinox. Please note that your car can also be fitted with a larger 2-inch Class III hitch, either Curt # 13591 or etrailer # e98865. These 2-Inch hitches also offer better compatibility with hitch-mount accessories like bike and cargo carriers. With this Class III hitch you could use our ball mount kit...
  view full answer...
• Choosing the Right Curt Class II Euro Style Ball Mount to Tow a Trailer Level
  If you are measuring to the top of the coupler then I will have to ask for the measurement to the bottom of the coupler instead. This is because the coupler covers the ball so the measurement to the bottom of the coupler provides a more accurate representation of what kind of rise or drop is needed to tow a trailer level. I am willing to bet that the measurement to the bottom of the coupler will have you at just about level. That would make the best Curt Euro-style ball mount with a 2...
  view full answer...
• Availability of Ball Mount with Built-in Hitch Ball
  We do have ball mounts with the ball installed like the Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs # C45036. If you do a search of "ball mount with ball" all of the available products will come up and you can choose one based on drop/rise and ball size. We also have the Euro-style drawbar. A Euro-style drawbar is a one piece unit, with the trailer ball permanently welded to the drawbar, versus a standard drawbar that uses a trailer ball that can be removed. I have included...
  view full answer...
• Will Curt Hitch C12111 fit a 2016 Ford Escape S Model
  I am pretty sure you mean to type 2016 Escape, but yes the Curt Hitch part # C12111 has been confirmed as a fit for all models of the 2016 Ford Escape so it would work well on your S model. For a hitch ball with a 1-7/8 inch hitch ball you would want the part # C45551 or for a 2 inch ball # C45552. For trailer wiring you would want the part # C56335.
  view full answer...
• What Happens to Center Reverse Light When Hitch is Installed on a 2004 Mini Cooper
  The rear center light of your 2004 Mini Cooper will need to be removed to install the Curt hitch part # C11126. The hole where the light was is where the hitch opening will come out. Check out the install instructions link I attached for more info on how the hitch installs. For trailer wiring you would need the part # 119250KIT, for a ball mount # C45551 for a 1-7/8 inch ball or part # C45552 for a 2 inch ball.
  view full answer...
• Recommended Trailer Hitch, Wiring and Ball Mount for 2006 Suzuki Grand Vitara
  The Curt Trailer Hitch Receiver # C12002 referenced in your question is confirmed to fit your 2006 Suzuki Grand Vitara. This is a Class II trailer hitch that will provide a 1-1/4 inch receiver opening and a 3,500 pound towing capacity. I also recommend checking the towing capacity of your vehicle as listed in the owner's manual. I have attached the installation details for your review. Please note that Curt requires all non-trailer loads such as bike racks and cargo carriers to be supported...
  view full answer...
• Trailer Hitch and Wiring for a 1992 Mercedes 400E
  There is a special circumstance when using a Class I trailer hitch for towing. Basically you will have to use the ball mount specified by the hitch manufacturer or it can void the warranty. This is to ensure that the wrong ball mount is not used (which could be too much stress on a Class I hitch). Trailer hitch C11085 does not fit your 1992 Mercedes 400E. The hitch you need is # C11816. The recommended ball mount for this hitch is # C45503. For a compatible 1-7/8 inch ball use # 19256...
  view full answer...
• Class II Curt Hitch Fit for 2013 Cadillac SRX
  For your 2013 Cadillac SRX the Curt Class II hitch part # C12070 is a confirmed fit and would work well. Since you have the port for the trailer wiring the Curt harness part # 56096 would fit and work well. For a 2 inch hitch ball ball-mount you would want the part # C45552 or for 1-7/8 inch part # C45551.
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?