JR Products LP tank pan is used to secure dual LP tank setups on most towable RVs.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there propane users. Today, we're going to be taking a look at replacement propane tank pans. We've got the black one currently installed, but they are also available in polar white that we're showing off here. So you can pick the one that best matches your trailer. Replacement tank pans can come in handy on your older trailers. You can kind of see our cross beam here.
This is kind of an older trailer. The old one that was on here had completely rusted out and I wouldn't trust it to hold down propane tanks. So we've gone ahead and installed this one here. The spacing was a little bit further than the hold down points that are pre drilled in it, but that's okay. We can go just to the outside of those.
As long as we clear the mounting circle, that's on the bottom of your propane tank. This is a direct replacement for the propane tank. Hold down systems available here at etrailer for both the 20 and the 30 pound tank models. In the center of our propane tank pan we're going to have a welded on nut that will accept a half inch by thirteen threaded rod. We have these threaded rods available here at etrailer as well, and either ranks for 20 pound or 30 pound tanks.
Now, if you're just replacing the pan, you can just use your old threaded rod and thread it in there. Now the hardware we use to attach ours with self tapping screws, since we did have to go just to the outside of the factory hold downs, this does not come with any hardware. So if you're replacing your old one, I'd recommend reusing that hardware. Or if you're just installing this on a trailer, maybe a new one you've purchased that doesn't have a good accommodation spot for a tank at the front. You can purchase your own hardware at a local hardware store.
Also wanted to point out that there's a cutout opening and our tank pan here, and that's to allow your regulators and pipes to pass up through. So that way you can, you've got a full tank cover. You can slide that all on top and protect your tanks as well as all of your hoses and regulators. So with our propane tanks back in place, you can see that it will properly secure two propane tanks. These are our 20 pound tanks that we've got installed, but it will also accommodate those taller 30 pound tanks. Also wanted to just point out that you can see the hardware that when we in screwed down ours. Since it didn't quite line up with the holes, we we're very careful to make sure that the tanks aren't going to touch any of those heads of hardware when we've got that installed. So just double check that to make sure when you're putting these in place. And that completes our look at replacement propane tank pan..
Average Customer Rating: 5.0 out of 5 stars (5 Customer Reviews)
JR Products LP tank pan is used to secure dual LP tank setups on most towable RVs.Item as described, good quality, prompt delivery, and excellent customer service prior to the order.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.