Replacement E-Clip for Demco and etrailer Tow Bars - Qty 1

Video Transcript for Review of Demco Demco and etrailer Tow Bar Storage Pin E-Clip - DM55VR

Hi there, I'm Michael with etrailer.com. Today, we're going to take a quick look at the Replacement E-Clip for your Demco and etrailer Tow Bars. This clip is going to attach to your storage pin to prevent that storage pin from wiggling free. So it just slides right into the slotted portion there. It takes a little bit of pressure, so I'm just going to push down on the table and that will lock it in place.Again, so that storage pin will stay where it needs to be, which is right at the top of your tow bar arms so that it can then be locked in place for storage. You can see there, where that pin is going to be located.

Now, this clip is going to work for the pins on several different models of tow bars. So it'll work on the Demco Victory Series Tow Bars, the Commander, Commander II, Dominator, Excali-Bar, Excali-Bar II and Excali-Bar III, as well as the etrailer SD and XHD tow bars.This is going to just be the clip here. So if you also need the pin, we have that available as well here at etrailer.com. You can find it using that part number that you see on the screen there, but if you don't get the pin you'll just get the clip. So if you already have the pin and you're just missing the clip, you want to make sure that that pin is going to stay where it needs to be, this is going to be a direct replacement from Demco.

So you can trust it's going to work with your pin and you're not going to have to worry about compatibility issues or anything like that.So it'll get the job done for you. You'll be very happy and able to use your tow bar the way it's supposed to be used. So that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..