Deka Ring Terminal - Heat Shrink - 16-14 Gauge - 1/4" Ring ID - Nylon Insulation - Blue - Qty 1

Deka Ring Terminal - Heat Shrink - 16-14 Gauge - 1/4" Ring ID - Nylon Insulation - Blue - Qty 1

Item # DW05737-1

lowest price pledge

Our Price: $1.53

Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.04 lbs

Quantity: 
In Stock, Ships Today
Accessories and Parts DW05737-1 - 1/4 Inch - Deka
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Videos


  • Wiring
  • Wire Connectors
  • Ring Terminals
  • Deka
  • 16-14 Gauge
  • 1/4 Inch
This blue ring terminal fits 16-14 gauge wire and has a 1/4" ring inner diameter. Insulated with heat-shrinkable nylon for adjustability and durability. Call 800-298-8924 to order Deka accessories and parts part number DW05737-1 or order online at etrailer.com. Free expert support on all Deka products. Guaranteed Lowest Price and Fastest Shipping for Deka Ring Terminal - Heat Shrink - 16-14 Gauge - 1/4" Ring ID - Nylon Insulation - Blue - Qty 1. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (7)
  • Q & A (27)
  • Videos (1)
  • Photos
  • Why etrailer?

Deka Accessories and Parts - DW05737-1

This blue ring terminal fits 16-14 gauge wire and has a 1/4" ring inner diameter. Insulated with heat-shrinkable nylon for adjustability and durability.


Features:

  • Fits 16-14 gauge wire
  • 1/4" Ring inner diameter
  • Heat-shrinkable nylon insulation allows for adjustability and provides durability
  • Blue
  • Quantity: 1
  • 1-Year limited warranty


05737 Ring Terminal - Heat Shrink - 16-14 Gauge - 1/4 Inch Ring Inner Diameter - Qty 1







Video of Deka Ring Terminal - Heat Shrink - 16-14 Gauge - 1/4" Ring ID - Nylon Insulation - Blue - Qty 1


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Deka Heat Shrink Ring Terminal Review

Speaker 1: Today we're going to be taking a look at the Deka quarter-inch heat shrink ring terminal for 16 to 14 gauge wire. That's going to be part number DW05737-1. Our heat shrink ring terminal is going to keep out all of that moisture and debris that could potentially cause corrosion build-up inside the connector. It's going to be especially useful in applications, like this, where it's going to be on the outside of either a vehicle or a trailer, where it's going to be exposed to the elements. It's also going to come in handy if you have a boat trailer, where it's going to be near a lot of water.Because, unlike traditional style ring terminals, it's going to be sealed at the back. Whereas with the other one, it's going to have an opening and potentially having a opening at the front.

Where we're going to have wires really close to that ring. Where it could, again, get that moisture in there and cause a lot of corrosion. A ring terminal is going to work with 14 to 16 gauge wire. And the ring, itself, is going to be a quarter-inch inner diameter. It's going to be perfect for those ground wires with the self-tapping screw, or any other small terminal that you can fit a quarter-inch ring around.The heat shrink is going to be a nylon.

If you just take some heat and apply it to it, it will shrink right around that wire and give it that extra durable coating, but also still be flexible enough that we can move the wire around and not have to worry about it breaking, or moving it around inside the terminal. We're going to be using our ring terminal for our ground wire coming out of our junction box on our trailer. We already have a hole drilled, so we're just going to measure out about how much wire we're going to need. It doesn't hurt to give yourself a little bit of extra. We'll cut off the excess and we'll strip back the end of the wire.We'll take our ring terminal, slide the bare wire in, and crimp it in place.

Just need to apply some heat, so we can shrink down that connector. We're going to be using a heat gun. That way I don't have to worry about it charring or burning the connector or the wires. We'll taking a self-tapping screw, put it loosely in place, and come back with a nut driver and tighten it up.That will finish up your look at the Deka quarter-inch heat shrink ring terminal, part number DW05737-1.


Customer Reviews

Deka Ring Terminal - Heat Shrink - 16-14 Gauge - 1/4" Ring ID - Nylon Insulation - Blue - Qty 1 - DW05737-1

Average Customer Rating:  4.7 out of 5 stars   (7 Customer Reviews)

This blue ring terminal fits 16-14 gauge wire and has a 1/4" ring inner diameter. Insulated with heat-shrinkable nylon for adjustability and durability.

- DW05737-1
by:

excellent product ,easy to install 516507



- DW05737-1
by:

Delivered fast and worked perfectly! 448994



- DW05737-1
by:

Order was complete and delivered in a timely manner. Only problem (minor) was the 7way pigtail was not wired to color code. Had to use test light to get 3 of the wires in correct location. Could be a problem if someone wasn't comfortable with ringing out wires. 375365



- DW05737-1
by:

Worth the money compared to the cheap hard-plastic versions...especially for marine applications. Suggest to still use shrink tubing on top of the heat shrink on the ring terminal...slide a piece of shrink tubing onto the wire, heat/shrink down the terminal first, then slide down your tubing and shrink on top of everything for a lasting connection. 319087



- DW05737-1
by:

great 237291



- DW05737-1
by:

I ordered multiple items from etrailer and the experience was perfect. The products arrived exactly as described with super fast shipping (standard option). The communication was frequent and thorough. This company knows good customer service. I didn't have any issues, but don't have any worries with this company if any come up. 224042



- DW05737-1
by:

Got my brakes and hubs on and they are great. Best price I could find and glad these guy are doing such a good job. No parts missing... now that's the ticket. Would recommend them any time. 221445


7
7

Ask the Experts about this Deka Accessories and Parts
Do you have a question about this Accessories and Part?


  • How to Install the On/Off Switch Panel for Atwood Gas and Electric Water Heaters Part # AT91230
  • I have attached the wiring diagram for the Replacement Double-Panel On/Off Switch for Atwood Gas and Electric Combination Water Heaters part # AT91230. The installation will be very simply with only 5 connections needed. There will be three terminals that go to the water heater (orange, blue, white), one terminal that goes to a 12 volt power source, and one terminal that goes to a ground. In order to make these connections I recommend using four of the Female Spade Terminal Quick-Disconnect...
    view full answer...

  • Recommended Junction Box Installation For LED Lighting And Break Away Kit
  • I'm happy to help. You can use the Trailer Wiring 7-Way Upgrade Kit # ET7WK to connect your trailer lighting. You can use the attached diagram to help you with color and function on the trailer side. I recommend using the 12 Gauge Black Primary Wire - per foot # 12-1-1. You can use ring terminals # DW05705-1 and butt connectors like # DW05745-10. You can use 16 gauge wire like # 16-4B-1 along with ring terminals # DW05737-1 and butt connectors # DW05744-5. Your side markers should...
    view full answer...

  • Items Needed to Re-Wire 1970s Vintage Scamp Travel Trailer
  • The 1970s Scamps are really cute vintage trailers and we can certainly help you with your re-wiring project. We have all wiring parts you'll ever need plus a wide range of trailer lights if you need light fixtures too. Our main page for trailer wiring items is linked and this includes many product categories you can just click on. New wiring is most easily installed using a junction box like # 38656, or like # 277-000141 which includes a pre-wired 7-way plug. All brake and light wiring...
    view full answer...

  • Recommended 2 Wire LED Marker Lights for 2015 Four Winds Siesta RV
  • For your 2015 Four Winds Siesta RV, I recommend the Rectangular LED Trailer Clearance and Side Marker Light with Reflex Reflector- Amber # MCL32ABB and Red # MCL32RBB. These are both 2 wire LED lights that will allow you to add marker lights to your current system without issue. You can simply splice these into your current wiring to add the additional lights you desire. For connection, I recommend # 16-1-1 wire and butt connectors # 45330.
    view full answer...

  • How to Connect a Surge Brake Actuator to Activate the Reverse Lockout Function
  • There are 2 wires that are coming out of the actuator in the Titan Disc Brake Kit and Leverlock Actuator w/ Electric Lockout # T4843100. You will want to connect one to the 5-Pole connector on your trailer and ground the other one using a Ring Terminal # DW05737-1; it doesn't matter which wire is used for which purpose. If you only have a 4-Pole connector on your trailer then I recommend using the Hopkins Endurance 5-Way Flat Trailer Connector # HM47910 instead. You will want to cut...
    view full answer...

  • How to Install 3-Wire Optronics Oval LED Trailer Turn Signal and Parking Light STL78AB
  • The Optronics Oval LED Trailer Turn Signal and Parking Light # STL78AB uses a separate white ground wire along with the two power input wires, black for parking and red for turn. Odds are your original incandescent lights used their mounting hardware to establish the ground so you'll want to find a suitable bare metal surface to make that connection using a ring terminal like # DW05737-1 (order two). You will also want to apply dielectric grease like # 11755 to that grounding point...
    view full answer...

  • Can Electric Drum Brakes Be Installed on Prestige Boat Trailer
  • Electric drum brakes are more common on boat trailers than they once were, and for the very reasons you mention: lower cost and easier installation than hydraulic surge brakes. More and more marine trailers are being factory-equipped with electric drum brakes and they can be used safely by always unplugging the trailer connector from the tow vehicle before the trailer enters the water. I linked a helpful overview article on this process that covers the whole conversion and all the items...
    view full answer...

  • Noco Genius Gen 3 10amps x 3 tank Wire Extension
  • The NOCO Genius Gen3 already has the fuse on each line and they don't have the extensions available for this model. You can extend the wires, but if you alter your wiring, you will void your warranty. You only need to extend the wires and put the ring terminals on either end to give yourself a working solution. I recommend using wiring # 16-1-1, and ring terminals # DW05737-1. You will simply use a bolt and nut to connect the two wires...but make sure the negative and positive wires...
    view full answer...

  • Splicing Two 3040-P Brake Controller Wiring Adapters Together to Reach Brake Controller
  • All you'll need to do is get a length of 16 gauge primary wire, part # DW02359-1 (sold by the foot) and use a butt connector like # DW05744-5 and a ring connector like # DW05737-1. Simply cut the white wire with the ring terminal and use butt connectors to splice in the length of wire. You'll also need butt connectors to connect the two # 3040-P wiring adapters together. The blue and black wires are 12 gauge and the red and white wires are 16 gauge. You'll have extra connectors from...
    view full answer...

  • 2-Prong Right Angle Plug for Use with Optronics Trailer Lights
  • For a 2-wire right-angle pigtail for your Optronics trailer lights you can use part # A46P36B which is 36-inches long. This can be cut to the 18-inch length if necessary. This will require ring terminal # DW05737-1. We also have shorter 10-inch length right-angle 2-prong plug # A49PB. You can use butt connectors like # DW05744-5 to make connections to the existing trailer wiring.
    view full answer...

  • Locating the CHMSL and Interior Light Wire to Wire SnugTop Shell on 2000 Chevrolet Silverado
  • I can help you wire up your SnugTop Shell to your Silverado but there are no direct connectors to do this, you will have to hardwire it into your vehicles lighting circuits. There are a couple of places you can access a dedicated brake light only circuit on your 2000 Chevy Silverado. First, you can tap into the circuit behind the third brake light on the cab of the truck. The brake light wire might also be located in the back of the vehicle. Some Silverado trucks come with the brake...
    view full answer...

  • MaxxAirFan Installation to Independent Car Battery
  • Your MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat # MA00-05100K will require a minimum of 5 amp service. I recommend installing a 15A inline fuse or 20 amp circuit breaker like # PK54220 to protect your fan components. The manual doesn't state anything about this setup, so it is simply my recommendation as precautionary. You can use # 16-1-1 wire and ring terminal # DW05737-1. I recommend butt connector # DW05744-5 to connect to fan power leads.
    view full answer...

  • Installation of Dual Switch on Suburban Brand Water Heater
  • You can absolutely install a double switch like the Replacement Double-Panel On/Off Switch for Atwood Gas and Electric Combination Water Heaters - White # AT91230 on your Suburban Water Heater. This switch when wired correctly will allow you to power the gas burner and electric components independently. I've attached a wiring diagram to assist. You may want to use the Female Spade Terminal Quick-Disconnect # DW01899-1, butt connectors # DW05743-5, and Deka Ring Terminals # DW05737-1.
    view full answer...

  • Hazards Turn on 2012 Ford Explorer When Headlights on RV are Turned on
  • It sounds like your ground could be the problem in this situation. The Ground wire on the Blue Ox Tow Bar Wiring Kit # BX8848 needs to be run to a main Ground or installed directly to a clean, bare metal surface on the chassis of your 2012 Ford Explorer. If you ran the white Ground wire from your 4-Way to the tail lights then you could possibly be getting some residual signal which could be causing your hazard lights to flash. Go ahead and disconnect the Ground wire and Ground it to...
    view full answer...

  • Replacing the 7-Way Connector on a 2006 Dodge Ram Truck
  • Sounds like your 2006 Dodge Ram 3500 was wired to be used with a 5th wheel or gooseneck trailer. If you are wanting to switch the 7-way plug back to its original location, then you will need to use the 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring, # HM40975-11998. This product will allow you wire your Dodge for both a 7-way and 4-pole flat and relocate the plug back to your bumper. Since someone has altered the factory plugs, you will have to hard wire your...
    view full answer...

  • Can the Voyager Digital Wireless Observation System Part # WVOS541 be Hardwired
  • I spoke to my contact at Voyager and they informed me that the Voyager Digital Wireless Observation System part # WVOS541 can be hardwired to the vehicle. Once you cut off the 12 volt DC universal power connection and remove the wire jacket you will have two wires to connect. The red wire is for the power which can be attached to any 12 volt power source on the vehicle that only receives power while the vehicle is on, such as the radio. The other wire is black which will need to be grounded...
    view full answer...

  • How to Install the GloLight LED Trailer Tail Light Part # STL190RB
  • The GloLight LED Trailer Tail Light part # STL190RB only has three wires and is very easy to install. We currently do not have an install video of this light but I can certainly walk you through the installation process. In order to install the lights on your trailer you will need a wiring harness such as the Wishbone 4-Way Trailer Wiring Harness part # A35W42B and a few wire connectors. The white wire on the light is for the ground and will need to be grounded to a clean bare metal...
    view full answer...

  • Ground Wire for Ceiling Light on Old Camper with Only a 12V Battery System
  • To wire the RV Euro Style Interior Double Ceiling Light with Built-In Switch # RVIL22 to your old camper with 12V battery system, you will simply connect the black wire to 12V power, and then the white wire will connect to any metal that is in some way attached to your trailer frame. You will want to use a self-tapping screw like # FA1131822 along with a ring terminal like # DW05737-1. I recommend connecting your 12V power and testing the ground location before tapping to ensure function....
    view full answer...

  • How To Install Cab Lights On The Roof Of A 1985 Chevrolet C/K Series Pickup Truck
  • We have a variety of roof mounted cab lights for your 1985 Custom Deluxe. Although there are many different types, the majority of them will have the same installation method/instructions. The Clearance Light Kit part # CB-15AK has everything you will need to install cab lights on your truck. The first thing you will want to do is disconnect your vehicle's battery. You will then want to use the cab lights to mark out the position on the roof where you want the lights to sit. After this...
    view full answer...

  • How to Ground a Trailer Light
  • I was not able to reference the tow smart light kits you are referring to but a trailer taillight will ground one of two ways. They can either ground using a single wire (usually white) or through the mounting hardware. If they ground using a single wire then that wire will need to be attached to a bare metal part of the trailer frame with a screw like part # FA1131822 and a ring terminal like part # DW05737-1. If there is any paint on the ground location then you will need to sand it down...
    view full answer...

  • How to Install the Optronics # MCL86AB Clearance Light on a 2005 GMC Sierra
  • Although the Optronics # MCL86AB is designed for trailers you can possibly use it on your 2005 GMC Sierra. When a clearance light only has one wire it is because it is grounded through the mounting hardware. Since the Steel Armored LED light that you referenced has 2 wires (one for power and one for ground) you would need a ring terminal like part # DW05737-1 and a self-tapping screw like part # FA1131822 for the ground.
    view full answer...

  • How to Install Ground Wire for LED Light That Replaces Stud-Grounded Light
  • Most likely the original lights you are replacing used the mounting hardware/stud to make the ground connection to the trailer frame. This is not unusual. A light such as # ST52AA uses the mounting stud to establish ground while the similar light # STL52ARB has a white wire for ground. All you need to do is connect the new light's white ground wire to a clean bare metal spot on the trailer, using a ring terminal like # DW05737-1 or you could run a ground jumper wire up to a wiring junction...
    view full answer...

  • Replacement 4-Way Trailer Connector and Ground Wire
  • The white wire on a 4-way trailer connector is usually for the ground. The reason your lights are not working is because this connection is severed. If you cannot re-attach the wire using a butt connector like part # DW05744-5 then you can replace the 4-way with part # HM48192. If a new ground wire needs to be ran you can use part # DW02359-1 (per foot), part # DW05737-1, and part # FA1131822. The ring terminal will need to be attached to a bare metal surface free of paint. I have attached...
    view full answer...

  • How To Mount the Optronics LED Clearance or Side Marker Light w/ Reflex Reflector Part # MCL31AB
  • The Optronics LED Clearance or Side Marker Light w/ Reflex Reflector part # MCL31AB mounts by running two screws like part # 1131832 though the base. In order to access these screw holes you will need to remove the lens. I have attached a photo that shows the screw holes. I have also attached an install video for you as well. In order to make the wiring connections you will also need part # DW05714 and part # DW05737-1.
    view full answer...

  • What Is Ring Inside Diameter Of 16-14 Gauge Ring Terminal
  • The inside diameter of a 16-14 gauge ring terminal ring like part # DW05737-1 is 1/4 inch.
    view full answer...

  • How to Create a Better Ground for a Clearance Light on a Trailer
  • Since you have already determined that it is a ground issue (which is almost always the problem) I would try sanding down the area you are installing the clearance light on. A good ground will have a solid connection to a clean, bare metal surface. If the screws are loose (as you found) or the metal has some paint or debris on it there could be some issues. If that doesn't work you can also try using a ring terminal like part # DW05737-1 and some 16 Gauge Wire # 16-1-1 to create...
    view full answer...

  • Installation of Trailer Wiring # 16-4B-1 Where Will the White Wire Go?
  • The white wire on the # 16-4B-1 bonded wire,is the ground wire. You will want to secure it to a clean metal surface that touches the trailer frame. It is often secured with a ring terminal like # DW05737-1 and screw # FA1131822. I have linked the above mentioned products as well as a Help Article to this page for your viewing and purchasing convenience.
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Jackie C
Updated by:
Adele M
Video Edited:
Kathleen M
Written by:
Laura H
Expert Research:
Jeffrey L
Installed by:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.