CE Smith Tongue Skid for Pole Tongue Trailers - Galvanized Steel
(22 reviews)
Price: $11.73
In Stock
CE Smith Tongue Skid for Pole Tongue Trailers - Galvanized Steel
Item # CE30002G
Our Price: $11.73
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (22)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
CE Smith Accessories and Parts - CE30002G
- Straight Tongue Trailer Coupler
- Tongue Skid
- CE Smith
Use this galvanized steel, corrosion-resistant tongue skid to keep your trailer's coupler from touching the ground when it's not hooked up to your hitch receiver. It bolts to the bottom of your trailer's tongue and provides years of use.
Features:
- Skid bracket keeps your straight-tongue trailer's coupler or actuator raised off the ground when trailer is not hitched up
- Prevents coupler from getting dirty and keeps it out of standing water
- Bolt-on installation
- Attaches to the underside of trailer tongue to raise the tongue height
- Does not include mounting hardware
- 3/16" Galvanized steel construction is sturdy and resists corrosion
- Made in USA
Specs:
- Dimensions: 4" tall x 1-1/2" wide
- Diameter of bolt hole: 1/2"
- Width of hole tab: 1/2"
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
30002G 3/16" Galvanized Steel Tongue Skid by CE Smith
Video of CE Smith Tongue Skid for Pole Tongue Trailers - Galvanized Steel
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for CE Smith Trailer Tongue Skid Review
Today were going to take a look at part number CE30002G. This is a Tongue Skid for pole tongue trailers. This galvanized trailer tongue skid is designed to keep your trailer up off the ground while its not connected to your hitch. Dimensions of this product is its 4 inches tall by 1-1/2 inches wide. The whole forward tab will need to be 1/2 inch. The hole is going to be a 1/2 inch diameter.
This part is designed to work with two 1/2 inch holes at the bottom of the tongue. The one bolt hole going towards the coupler will use the bolt and the hole going towards the back of the trailer, the bracket has a tab that goes straight into it and thats it. With that that will finish it for part number CE30002G from CE Smith.
Customer Reviews
CE Smith Tongue Skid for Pole Tongue Trailers - Galvanized Steel - CE30002G
Average Customer Rating: 4.9 out of 5 stars (22 Customer Reviews)
Use this galvanized steel, corrosion-resistant tongue skid to keep your trailer's coupler from touching the ground when it's not hooked up to your hitch receiver. It bolts to the bottom of your trailer's tongue and provides years of use.
- CE30002G
by: Blair C10/15/2013
Ce Smith Tongue Skid For Pole Tongue Trailers - Galvanized Ce Smith Coupler Lift Handle - 10 Long X 5 Tall Installation of both items on a single trailer is shown in photos below.
- CE30002G
by: John H.05/30/2017
Just what I needed for my old Tee-Nee boat trailer. Simple one bolt installation. I mounted the skid so that my wrench could just reach the nut inside the trailer tongue.
- CE30002G
by: Dirtstiff02/26/2017
Just the tongue stand I needed for my little HF Tag along trailer. Reasonably priced. Quick shipping Excellent followup with sale and satisfaction. Will definitely purchase from etrailer again. Thanks!
- CE30002G
by: Ed12/08/2021
It arrived quickly and in excellent condition! Thank you!
- CE30002G
by: Kent09/20/2021
Easy to order and shipped right away. Just the product I was looking for.
- CE30002G
by: Tim01/11/2019
The service with etrailer is excellent! The skid pole fit perfectly on my Malone Microsport trailer.
- CE30002G
by: Rwinkelman10/28/2016
Quality material, and quick arrival from order date. Customer service quite helpful. If you want quality, and savings this is the place. Only down is could not obtain answer on load capacity on bolster brackets, but seems to be same industry wide. Would be great to know this for both 7 & 11 gauge.
- CE30002G
Charles C - 08/20/2018
by: Charles C.08/17/2017
George --- I, was Totally pleased with the way my request was handled in a very timely manner, and d how you kept me posted on it being shipped and delivered.
Comments
Good Morning George ...... I, have had NO problems, at all with your product. Im very much pleased with it. I, placed it on my fishing boat. Therefore, I will keep your company and You, in my thoughts if I, would need anything else in the future. Stay Well George and Gods Speed Always.......
Charles C - 08/20/2018
- CE30002G
by: Perry06/13/2018
Completely genuine replacement for my kayak trailer original tongue skid that met an untimely death when trailer came unhitched. The skid did it’s job and protected everything else. I was glad to find an exact replacement
- CE30002G
by: Rick10/15/2014
Excellent service. Shipped and arrived on time and fit my EZ-Loader trailer as promised.
- CE30002G
by: Tom S08/14/2014
Quick delivery and only item found on line to replace an old corroded skid on my boat trailer. Good service.
- CE30002G
by: Marc12/24/2020
Excellent service. Two items ordered were exactly what I required and look to be of excellent quality.
- CE30002G
by: Steve M06/14/2013
Looks to be a great product. Heavy duty, and galvanized well.
- CE30002G
by: James05/28/2019
Easy installation, good quality, exceptional value.
- CE30002G
by: Bill03/15/2019
Arrived in great condition and on time Very easy to shop and compare products
- CE30002G
by: Peter10/01/2018
performing as designed
- CE30002G
by: Michael05/05/2021
- CE30002G
by: Joshua10/21/2019
Exactly as described
- CE30002G
by: Robert05/12/2021
- CE30002G
by: Kitty W07/29/2017
Received yesterday will Niall this afte rnoon
- CE30002G
by: Jason W.12/08/2016
Simple and effective way to keep you trailer coupler off the ground.
- CE30002G
by: Jeff K06/21/2017
Fast delivery
23
23
Ask the Experts about this CE Smith Accessories and Parts
- Trailer Tongue Bolt Hole Spacing for CE Smith Tongue Skid # CE30002GI went out to our warehouse so I could take a measurement on the CE Smith Tongue Skid # CE30002G. I found that the existing mounting hole and tab are designed to line up to bolt holes on the trailer tongue that are spaced apart by 4 inches, on center. I have attached an image to assist.
view full answer...
- Folding Tongue Coupler Parts To Create Complete AssemblyThe kit you mentioned has been discontinued, however, I can help you with the individual components. To make this kit, you will want the Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Tongue - Bolt On - Up to 5,000 lbs # FHDPB330301. This will mount to a 3 inch by 3 inch square tube in whatever length you decide which will need to be obtained locally. On the end of that square tube is the Fulton Fas-Lok Coupler, 2" Ball, 3" Channel - 5,000 lbs # F343000301. For the safety chains, you...
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality accessories and parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Installed by:
Joe V
Video Edited:
Andrew K
Written by:
David L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.