See what our Experts say about this MaxxTow Off Road Lights

• Will 12V LED Lights Work with 6V System
  Using LED lights like # MT80637-2 on a 6 Volt system may result in much dimmer LEDs but it is also possible that the LEDs will not produce any light at all. You will also dramatically shorten the lifespan of the LEDs and then there's also the potential damage caused by overheated wires from excessive amperage draw - all reasons why we do not recommend using a 12V LED light on a 6V system. Since we do not offer any 6V lights, you could technically use a 12V breakaway battery like # 3801250...
  view full answer...
• How to Mount Off-Road Lights to 2018 Subaru Outback Wagon
  I can definitely help you figure out how to mount a light bar on your 2018 Subaru Outback Wagon, but as far as grille guards or bull bars go there are no fits on the market. If you're seeing fits on a different website then I'll need to know the brand of the guard or bar to know if we have something that fits. If you already have a roof rack on your Outback Wagon then you can use a carrier like the Yakima LoadWarrier # Y07070 with the Mounting Brackets # Y07075 so that you can install...
  view full answer...
• How to Add Lights to the Roof of a 2016 Jeep Patriot
  I do have an option for you but a 2016 Jeep Patriot is not exactly considered to be an off-road vehicle therefore they don't make any custom mount light bar kits for it. If you wanted to add lights to your roof without having to drill into the roof itself then your best option would be to mount some pod lights on a roof basket. In order to do this you will first need a roof rack if you do not already have one. For this, I recommend the Yakima CoreBar Crossbar System part # Y00421 and part...
  view full answer...
• Mounting Bracket Width of MaxxTow MT80637-2 Off Road Lamp
  The existing base bracketry on your Peterson # 507-12 is 1-7/8 inch wide, while that of the MaxxTow # MT80637-2 is 1-1/8 inches. Since the old bracket is wider, you can reuse it, you'll just need to devise a way to shim out the base of the new lamp, such as using some stacked washers to take up the space differential. I've provided a photo showing the dimensions side by side. The photos aren't quite to scale, so it appears that the bracket of the MaxxTow lamp is wider than the Peterson,...
  view full answer...
  
• Can Westin Driving Lights, # 09-0305, be Mounted Upside Down
  The MaxxTow Lights, # MT80637-2, can be mounted upside down, right side up, diagonally, side ways, horizontally, vertically, and any other configuration you can think of (within the limitations of its little mounting bracket of course). Basically, mount them how you want, where you want with the lens pointed in the correct direction for your application and they will work just fine.
  view full answer...
• Can Vehicle Off-Road Lights be Mounted on a Kayak and Connected to 12 Volt Battery
  It is possible to install driving lights, like part # MT80637-2, on a kayak with a 12-volt battery to power them. You'd just want to make sure they were installed in a way to keep water off them.
  view full answer...
  
• Are the MaxxTow Off-Road Lights Spot or Flood Lights
  The MaxxTow Off-Road Lights part # MT80637-2 have a 30-degree projection which would classify them as a spot light whereas flood lights usually have a projection between 45-degrees and 60 degrees. If you want to get a better view of the projection while in use you can take a look at the attached review video which shows this @ 3:20.
  view full answer...
• Wire Gauge of MaxxTow Off-Road Lights
  There isn't a formula for the wire gauge, you can simply match it up to the wire size used with this light, which is 14 gauge wire. I have added a link to a video review as well of the MaxxTow Off-Road Lights # MT80637-2.
  view full answer...
• How Sturdy Is The Mount On The MaxxTow Off-Road Driving Lights?
  The mount on the MaxxTow Off-Road Driving Lights # MT80637-2 itself is very sturdy. It is intended/designed for off-road driving conditions where the idea is durability. These lights can mount well on a snow plow as well and are often used for that application. The housing is powder coated for durability to protect the metal from the elements. .
  view full answer...
• How to Mount MaxxTow Off-Road Lights to RV and Jeep
  You will need to figure out the fine details on your end but what I would try using are the MaxxTow Off-Road Lights # MT80637-2 along with 2 of the SeaSucker 4.5" Low Profile Vacuum Mount # SS44FR as they both are compatible with 1/4" mounting hardware. The off-road lights will be a great solution for the last 4 miles of your journey, but I would avoid using them on the highway as they will easily attract the attention of the local authorities. You shouldn't have to upgrade anything power-wise...
  view full answer...
• Parts Needed to Install Westin Off Road Lights
  Thanks for your purchase of the Westin Sportsman Grille Guard # 40-3825 for your 2017 Toyota 4Runner! In order to install the MaxxTow Off-Road Lights # MT80637-2 on the grill guard you need a power source, wiring, a switch, and some connectors. For the power source I do recommend using the Firestone Fuse Circuit Tap Kit # F2526 because it will help to protect your wiring. If you don't go this route then you'll have to place a fuse or circuit breaker on a power wire that's hooked up to...
  view full answer...
• Recommended Fog Light Kit for a 2007 Dodge Ram
  You may be able to use the MaxxTow Off-Road Lights, # MT80637-2. This is two lights with 4-1/2" inch diameter. This should be small enough to fit inside the openings on your Ram, but an issue for you might be that these lights are designed more to fit a light bar or grille guard then in a cavity on the front of a vehicle. I have included an install video for you to see if they might work for you.
  view full answer...
• How to Use the MaxxTow Lights # MT80637-2 as Reverse Lights
  There's no reason you couldn't use the MaxxTow Lights # MT80637-2 as an additional reverse light on your vehicle. The number 86 pin on the relay is the keyed circuit. You would just need to tap into your reverse light circuit and run the wire to the 86 pin of the relay and the kit will turn on when your reverse lights are turned on. If you have a 7-way trailer connector on your vehicle you should have a reverse light circuit present there that you could use. Typically the center pin of...
  view full answer...
• Recommendation for Off Road Lights on ATV
  I recommend taking a look at the MaxxTow, # MT80637-2. These combined 54-Watt halogen lights are for the 12 volt systems like trucks, ATV, and motorcycles.
  view full answer...
• Will MaxxTow Off-Road Lights MT80637-2 be Brighter at 30 Volts than 10 Volts
  They may be a little brighter at 30 volts than at 10 but what really matters is the amperage since lights # MT80637-2 will be drawing the same amount despite what the voltage is. And since LED lights require such little power to begin with to operate at full capacity you may not even be able to tell the difference in voltage.
  view full answer...

Do you have a question about this Off Road Light?