Vehicle Style: 8 Foot Bed with OEM Prep Pkg Change
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
Hitch does not fit in OEM pucks, but it is compatible with OEM gooseneck ball. Hitch may also be used with ball RP19311, which is sold separately.
More Information >Fifth Wheel Hitch: RP30047
Price: $470.12
Installation Rails: RP30156
Price: $439.79
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit RP30156
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
The Installation Rails are an adapter, and will cause the fifth wheel hitch to sit approximately 2 inches higher. This affects the height ranges indicated in the Hitch Specs.
More Information >Fifth Wheel Hitch: RP30928
Price: $1,129.21
Installation Rails: RP30156
Price: $439.79
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit RP30156
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
The Installation Rails are an adapter, and will cause the fifth wheel hitch to sit approximately 2 inches higher. This affects the height ranges indicated in the Hitch Specs.
More Information >Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Videos
for Fifth Wheel Hitch
Help Articles
for Fifth Wheel Hitch
Expert Answers
for Fifth Wheel Hitch
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length…
view full answer...The OEM prep package consists of 4…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…
view full answer...Most fifth wheel rails are made to the same industry standard dimensions. They…
view full answer...Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…
view full answer...I&…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will…
view full answer...I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures…
view full answer...Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…
view full answer...