Vehicle Style: 6-3/4 Foot Bed with OEM Prep Pkg Change
Fifth Wheel Hitch: C16541
Price: $1,236.55
Installation Rails: C88KR
Price: $424.95
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C88KR
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
The Installation Rails are an adapter, and will cause the fifth wheel hitch to sit approximately 2 inches higher. This affects the height ranges indicated in the Hitch Specs.
More Information >Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
There may be clearance issues over the tailgate with some fifth wheel pinboxes. It will be necessary to tow with the tailgate down to use this product if your pinbox will not clear the tailgate while in use.
More Information >Fifth Wheel Hitch: C55DR
Price: $1,154.95
Installation Rails: C88KR
Price: $424.95
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C88KR
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
The Installation Rails are an adapter, and will cause the fifth wheel hitch to sit approximately 2 inches higher. This affects the height ranges indicated in the Hitch Specs.
More Information >Fifth Wheel Hitch: C16521
Price: $854.37
Installation Rails: C88KR
Price: $424.95
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C88KR
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
The Installation Rails are an adapter, and will cause the fifth wheel hitch to sit approximately 2 inches higher. This affects the height ranges indicated in the Hitch Specs.
More Information >Fifth Wheel Hitch: C23DR
Price: $1,137.95
Installation Rails: C88KR
Price: $424.95
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C88KR
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
The Installation Rails are an adapter, and will cause the fifth wheel hitch to sit approximately 2 inches higher. This affects the height ranges indicated in the Hitch Specs.
More Information >Videos
for Fifth Wheel Hitch
Help Articles
for Fifth Wheel Hitch
Expert Answers
for Fifth Wheel Hitch
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…
view full answer...Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan…
view full answer...As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…
view full answer...Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you…
view full answer...You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…
view full answer...As long as the RBW Lil' Rocker mounts to industry standard base rails you'll need the Curt Adapter Rails #C29BR that fit in the OEM puck system on your 2019 Ram 2500 and give you a…
view full answer...A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne…
view full answer...The Curt A25 5th Wheel Trailer Hitch for Ram Towing Prep Package #C16046 will work well with the Roto-Flex pin box. The combination will be a good match for you and this hitch with the specific connection to the factory prep package pucks will make…
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so…
view full answer...