Vehicle Style: 5-1/2 Foot Bed without EcoDiesel engine Change
Fifth Wheel Hitch: C16180
Price: $948.95
Installation Rails: C16444-204
Price: $317.68
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Required Accessory:
Sidewinder King Pin is required with this short bed truck
Installation Notes:
Custom Install Kit C16444-204
Above Bed Rails
4 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Installation kit will fit models with factory Air Suspension system
Tech Tip:
Please refer to our Sidewinder FAQ page for a measurement formula to ensure cab clearance with your trailer.
More Information >Fifth Wheel Hitch: BWRVK3255
Price: $799.00
Installation Rails: BWRVR3205-00
Price: $312.14
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Required Accessory:
Sidewinder King Pin is required with this short bed truck
Installation Notes:
Semi-Custom Install Kit BWRVR3205-00
Above Bed Rails
4 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Product is not compatible for models with Rambox
Hitch does not fit vehicles with factory Air Suspension system
Patriot hitch is compatible with Sidewinder products, but requires the use of custom wedge SWW-06, which is sold separately
Tech Tip:
Please refer to our Sidewinder FAQ page for a measurement formula to ensure cab clearance with your trailer.
More Information >Videos
for Fifth Wheel Hitch
Help Articles
for Fifth Wheel Hitch
Expert Answers
for Fifth Wheel Hitch
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you…
view full answer...Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached…
view full answer...If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…
view full answer...The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The…
view full answer...Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…
view full answer...