Vehicle Style: 8 Foot Bed without EcoDiesel engine Change
Fifth Wheel Hitch: C16120
Price: $656.95
Installation Rails: C16444-204
Price: $317.68
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C16444-204
Above Bed Rails
4 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Installation kit will fit models with factory Air Suspension system
More Information >Fifth Wheel Hitch: C16120
Price: $656.95
Installation Rails: C16306-204
Price: $217.66
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Semi-Custom Install Kit C16306-204
Above Bed Rails
5 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Product does not fit vehicles with factory Air Suspension system
More Information >Fifth Wheel Hitch: C16115
Price: $349.52
Installation Rails: C16444-204
Price: $317.68
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C16444-204
Above Bed Rails
4 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Installation kit will fit models with factory Air Suspension system
More Information >Fifth Wheel Hitch: C16115
Price: $349.52
Installation Rails: C16306-204
Price: $217.66
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Semi-Custom Install Kit C16306-204
Above Bed Rails
5 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Product does not fit vehicles with factory Air Suspension system
More Information >Fifth Wheel Hitch: BWRVK3200
Price: $699.00
Installation Rails: BWRVR3205-00
Price: $309.89
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Semi-Custom Install Kit BWRVR3205-00
Above Bed Rails
4 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Hitch does not fit vehicles with factory Air Suspension system
More Information >Videos
for Fifth Wheel Hitch
Help Articles
for Fifth Wheel Hitch
Expert Answers
for Fifth Wheel Hitch
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the…
view full answer...Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…
view full answer...The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775…
view full answer...A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710.…
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept…
view full answer...You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…
view full answer...Because your trailer has a Turning Point pin box and your Ram has a 6.5' bed I do recommend going with a fixed hitch and using the Turning Point as a rotating…
view full answer...To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're…
view full answer...There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at…
view full answer...The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…
view full answer...Filter Products (10)
Contact and Help
What our customers are saying:
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN