Expert Review Video:
Vehicle Style: 6-1/2 Foot Bed Change
Fifth Wheel Hitch: RP30075
Price: $890.71
Installation Rails: RP30035
Price: $195.78
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Universal Install Kit RP30035
Above Bed Rails
6 Hour Estimated Installation Time
Drilling into the vehicle frame is required to install this product
Hitch does not work in trucks with Flareside or Stepside bed
When using a slider with this hitch, the lowest height setting will not be able to be used on the hitch
More Information >Videos
for Fifth Wheel Hitch
Help Articles
for Fifth Wheel Hitch
Expert Answers
for Fifth Wheel Hitch
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length…
view full answer...The OEM prep package consists of 4…
view full answer...Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…
view full answer...The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept…
view full answer...Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you…
view full answer...The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about…
view full answer...The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775…
view full answer...As long as the RBW Lil' Rocker mounts to industry standard base rails…
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the…
view full answer...To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram…
view full answer...I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from…
view full answer...