Vehicle Style: 3500 - 6-1/2 Foot Bed with OEM Prep Pkg Change
Fifth Wheel Hitch: DM8550034
Price: $1,725.00
Installation Rails: DM6099
Price: $649.00
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit DM6099
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
The Installation Rails are an adapter that will cause the fifth wheel hitch to sit approximately 2 inches higher, which affects the Vertical Adjustment ranges listed.
More Information >Fifth Wheel Hitch: DM8550035
Price: $2,050.00
Installation Rails: DM6099
Price: $649.00
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit DM6099
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
The Installation Rails are an adapter that will cause the fifth wheel hitch to sit approximately 2 inches higher, which affects the Vertical Adjustment ranges listed.
More Information >Fifth Wheel Hitch: C16521
Price: $912.43
Installation Rails: C16022
Price: $450.95
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C16022
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
The Installation Rails are an adapter, and will cause the fifth wheel hitch to sit approximately 4 inches higher. This affects the height ranges indicated in the Hitch Specs.
More Information >Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Fifth Wheel Hitch: RP30075
Price: $890.71
Installation Rails: RP30154
Price: $425.96
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit RP30154
Below Bed Rails
0.5 Hour Estimated Installation Time
When using a slider with this hitch, the lowest height setting will not be able to be used on the hitch
The only slider units compatible with this adapter are RP30048 or RP50024
Tech Tip:
The Installation Rails are an adapter, and will cause the fifth wheel hitch to sit approximately 2 inches higher. This affects the height ranges indicated in the Hitch Specs.
More Information >Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Fifth Wheel Hitch: C16541
Price: $1,239.14
Installation Rails: C16022
Price: $450.95
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C16022
Below Bed Rails
0.5 Hour Estimated Installation Time
Tech Tip:
The Installation Rails are an adapter, and will cause the fifth wheel hitch to sit approximately 4 inches higher. This affects the height ranges indicated in the Hitch Specs.
More Information >Videos
for Fifth Wheel Hitch
Help Articles
for Fifth Wheel Hitch
Expert Answers
for Fifth Wheel Hitch
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…
view full answer...The OEM prep package consists of 4…
view full answer...Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…
view full answer...The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70…
view full answer...The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept…
view full answer...The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing…
view full answer...As long as the RBW Lil' Rocker mounts to industry standard base rails…
view full answer...A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the…
view full answer...You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…
view full answer...Because your trailer has a Turning Point pin box and your Ram has a 6.5' bed…
view full answer...To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram…
view full answer...