Vehicle Style: 1500 LD - 6-1/2 Foot Bed Change
Fifth Wheel Hitch: C55DR
Price: $1,154.95
Installation Rails: C16418-204
Price: $276.89
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C16418-204
Above Bed Rails
4 Hour Estimated Installation Time
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
Hitch does not work in trucks with Flareside or Stepside bed
When using a slider with this hitch, the lowest height setting will not be able to be used on the hitch
More Information >Fifth Wheel Hitch: C16541
Price: $1,239.13
Installation Rails: C16418-204
Price: $276.89
Complete Kit:
Fifth Wheel Hitch Specs:
Recommended Trailer Wiring:
Installation Notes:
Custom Install Kit C16418-204
Above Bed Rails
4 Hour Estimated Installation Time
No drilling required to install the frame brackets of installation kit. Installation rails are rated to meet vehicle manufacturer's tow ratings - see vehicle owner's manual
Hitch does not work in trucks with Flareside or Stepside bed
When using a slider with this hitch, the lowest height setting will not be able to be used on the hitch
More Information >Videos
for Fifth Wheel Hitch
Help Articles
for Fifth Wheel Hitch
Expert Answers
for Fifth Wheel Hitch
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length…
view full answer...The OEM prep package consists of 4…
view full answer...Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…
view full answer...A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the…
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept…
view full answer...You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…
view full answer...Because your trailer has a Turning Point pin box and your Ram has a…
view full answer...To get the…
view full answer...There are a couple of options…
view full answer...The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…
view full answer...Filter Products (4)
Contact and Help
What our customers are saying:
This company is one of, if not the best company I have done business with. The prices are good and also because of the employees. They are all very knowledgeable, helpful and know how to treat a costumer which is very hard to find these days.
Dominick
Hackettstown, NJ