To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
No more stopping mid-turn to climb out and move a manual slider. The automatic slider built into this hitch gives you 14" of fore/aft travel whenever you make a sharp turn. The rack-and-pinion gears respond smoothly to your steering and shift the head toward the tailgate, giving you the clearance you need for slow turns in campgrounds or parking lots. When you straighten out, it slides back into towing position automatically for a hassle-free drive.

The wraparound, single-piece jaw grabs your trailer’s king pin for full 360-degree contact and a tight fit that cuts down on rattle and chucking. A 3/4" thick solid steel locking bar reinforces that grip and automatically locks into place when the jaw closes. You feel it when you pull away—less noise, less movement, and a confident, secure link between truck and trailer.

The double-pivot hitch head pivots front to back and side to side so the trailer tracks naturally behind you. Three polyurethane dampeners cushion those movements to absorb road shock and quiet down your tow. It all adds up to smoother handling and less of that jarring feedback through the truck on uneven pavement or rough roads.
Getting on the road is straightforward thanks to the pre-assembled hitch base and clear height adjustments. The included base rails and custom brackets bolt in easily, and you can choose from three height settings—15-1/4", 16-1/2", or 18"—to level your trailer and keep proper bed rail clearance. Once installed, just couple up, secure the spring-loaded handle, and you’re ready to roll with a hitch rated for 21,000 lbs gross towing weight and 5,250 lbs vertical load.

This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Demco Hijacker Premier Series Semi-Custom Mounting Brackets for 5th wheel above-bed base rails. These are a custom fit part. They are designed to fit the 2004 to 2014 Ford F-150 truck with either the 6 1/2' bed or the 8' bed. Now these installation brackets will mount beneath your truck bed and they provide the attachment points for your 5th wheel rails. Now the base rails, we do sell separately on our website. It's part number DM6071, and the base rails is what will sit in your bed and allow the installation of your 5th wheel trailer hitch to your truck. Now these semi-custom brackets will mount to existing holes in your vehicle's frame, and they are designed to avoid known obstacles along your trucks frame.
All these parts are a sturdy steel construction. They have a nice, black powder coat finish on them to help resist corrosion. All of the hardware is included, a nice set of detailed instructions, a fish wire for fishing the bolts through the holes, and these parts are made in the USA. That should do it for the review on the Demco Hijacker Premier Series Semi-Custom Mounting Brackets for 5th wheel above-bed base rails.
Ratings & Reviews

Jon G.
7/30/2021
Thank you for the review! While I do see where a hole in the mounting bracket would make this easier to remove with your Adapter Plate # DM6333, a solid bracket in this instance is much better for strength, especially considering this hitch is designed around the universal rails for trucks.

Richard
6/5/2019
Great, customer service with [Demco Representative] could not be any better..he knows this hitch like the back of his hand . I would buy another just because of him.

Sierra K.
9/1/2021
In the description it says locking plates, sold separately, are required for the Rota-Flex Pin box that you have. Item # DM6171

Darrel
1/17/2023
I firmly believe that every fifth sold should have one of these hitches. It is a job getting it in and out of truck but I feel better knowing its not going to let my trailer damage my truck.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Joe W.
10/26/2018
After about 6000 miles the hitch developed some fore and aft movement. After another 2000 miles it seemed to be excessive with a loud clunk when stopping and starting. Yes, I do grease it as per instructions before each trip. I called Demco and told them the problem and they sent me the parts I needed at no charge since it was under warranty. Since I had the mechanical ability I disassembled, diagnosed and repaired it myself. I thought later on that I should have been compensated something for my time only because if I took it to a dealer they would have charged for labor. Just a suggestion, there needs to be an easier way to lubricate this hitch rather than removing the large pivot pin and also the large pivot bolt and greasing them by hand. Some well placed grease fittings would make this job a lot easier and cleaner, especially when on the road. Also, the hitch owner would be far more inclined to do it. Other than that the hitch has performed great and I am very happy with it. Thanks.