Wiring Diagram For Ultra-Fab Electric A-Frame Jack

Question

Question:

Do you have the wiring diagram for the electric jack Togo switch. All wires are off from it. 4 wires and not sure what hooks to where.

asked by: Roger B

0

Expert Reply:

I have attached a drawing that shows how the wires are run on an electric winch like the Ultra-Fab Electric A-Frame Jack, part # UF38-944017.

If you can find the model number of the jack you are installing, I would be happy to help with the instructions and wiring diagram that will work for you.

expert reply by: Jeffrey L

0

click to enlarge

Answer 1

Yes, I have attached the wiring diagram of the Replacement Electric Jack Switch with Harness #LC387874 for you to reference. Basically the Blue wire goes to a 6A auto reset breaker, like part #LC134181, which then goes to the positive circuit for…

view full answer...

Answer 2

I attached pictures that show how the switches of the Bulldog Powered Jack #BD500187 get wired.

view full answer...

Answer 3

To replace the Extend/Retract Switch for Lippert Electric Trailer Jack #LC49MD you'll just need to keep track of how the original was hooked up and replicate that. Unfortunately Lippert doesn't have a wiring diagram but we do have a photo we…

view full answer...

Answer 4

If you take a look at the diagram I've provided for the Replacement Power Switch for RAM Electric Trailer Jack with Footplate #EJ-3520-PSW which goes to the Electric Jack w/ Footplate #EJ-3520-WBX, you'll be able to see how both of the…

view full answer...

Answer 5

There isn't a wrong way to install the Replacement Power Switch #EJ-3520-PSW for your Electric Jack #EJ-3520-BBX, just a wrong way to wire it. So long as you wire it like you see in the accompanying photo you won't have any issues.

view full answer...

Answer 6

I have attached a photo you can use to connect the Replacement Power Switch #EJ-3520-PSW to your 3,500 lb RAM jack. We don't have a direct wiring diagram but if you notice even though the wires are the same colors they look pretty different so…

view full answer...

Answer 7

You did some excellent troubleshooting and because of that we know the issue is ground related. What is going on with your trailer is that it does not ground sufficiently through the trailer frame. What you can do is ran a ground wire from the…

view full answer...

Answer 8

I attached a picture that I got from RAM jacks that shows how the RAM Jack switch part #EJ-3520-PSW that you referenced gets wired up.

view full answer...

Answer 9

For your electric jack, there are only three possible explanations for your jack not working with a charged battery. Either power is not getting to your motor, your motor is bad, or your ground connection isn't working properly. To test power,…

view full answer...

Wiring Diagram For Ultra-Fab Electric A-Frame Jack

Continue Researching