Seal Recommendation for a Trailer Hub that has L44649/L68149 Bearings

Published 08/06/2014

Products Featured in This Question

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2

(2779)

$6.23

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2972)

$16.94

Question:

I am helping a friend repack and replace the inner and outer bearings on his boat trailer and need to purchase new grease seals for the back ones. The bearing numbers are as follows: - outer front bearing L44649 - inner back bearing L68149 What seals do I need? What grease should I use to repack the bearings and refill the grease chamber with? I included a picture of the back bearing and its grease seal with a ruler in the picture. The rough OD of the seal is 2.34 Thanks

asked by: John

Expert Reply:

Based on your bearing numbers and the rough dimension of your seal it looks like you have a number 84 spindle. For a complete bearing kit with everything needed you would want the part # BK2-100.

If you only need the seal at this point you would want part # RG06-050.

expert reply by: Jameson C