Orientation of Rear Hanger Installation on a Trailer with Double Eye Leaf Spring Suspension
Updated 07/06/2024 | Published 06/07/2014
Question:
I received the kit and was laying things out when I noticed that the rear hanger is not symmetrical. The bushing is off to one side and not centered in the fitting. There is a stamping on the part that says TOP. Which side of the hanger is forward? What am I missing? Thank you
asked by: Stephen V
Expert Reply:
The portion of the rear hanger with TOP labeled on it will get welded to the trailer frame.
I am including a picture of the hangar that shows the top marking and how it is positioned on the trailer.
I attached an FAQ on trailer suspension for you to check out also.
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Ultimate Overview of the Replacement Key for Thule and SportRack Racks and Carriers
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Search Results: e32gr
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Search Results: leaf spring mounts
- Search Results: leaf spring hanger brackets
- Search Results: double eye springs trailer suspension parts
- Search Results: single axle hanger kit
- Q&A: Distance Between Hangers for the # APS5 kit When Used with Leaf Spring # SP-212275
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Replacement Shackle Strap - 2-5/8" Long - Galvanized
- Search Results: lock nuts
- Video: Let’s Check Out the CE Smith U-Bolt Kit for Mounting Round Trailer Axles
- Video: Trailer Axle with Idler Hubs: The Breakdown
- Video: Measuring To Choose The Right Trailer Axle
- Video: Trailer Axle with Idler Hubs Spec Review
- Q&A: Is Lock Nut with Nylock Difficult to Thread Onto Bolt
- Q&A: Selecting Replacement Front Spring Hanger for 2000-lb Axle
- Q&A: Comparing Different Hanger Kits ffor Single Axle Trailer with Double Eye Leaf Spring
- Q&A: Is it Okay to Have Different Size Tires on a Trailer
- Search Results: shackle links trailer leaf spring suspension
- Q&A: Spring Hanger and Axle Diameter Measurements for Installing Leaf Springs on Single Axle Trailer
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Video: Ultimate Overview of the Rear Hanger for Double-Eye Springs
- Video: All About the Single-Axle Trailer Hanger Kit for Double-Eye Springs
Tom
7/4/2024
I have these hangers on my single 6000lbs axle. There are 3000lbs rated springs on each side. Are these hangers rated for that?