Trailer Wiring that Fits 2025 Kia Sportage

Question

Question:

You do not have a wiring kit shown for a 2025 KIA Sportage, although you do have a hitch. Any idea when one might be available?

asked by: Robert W

0

Expert Reply:

Hey Robert, I hope we get a custom fit trailer wiring harness that fits your 2025 Kia Sportage soon but at this time all we have is a universal harness like the part # C59236. I would think reasonably soon we would have something but we don't generally get timelines. I did just double check to make sure there wasn't something we just weren't aware of.

expert reply by: Jameson C

0

Answer 1

Hi Dave; yes, the Curt #C94WR also fits the 2025 Hyundai Tucson Hybrid. You can actually see it on a hybrid model in the picture I added to this page. The hitch has the 2" receiver you need and a max tongue weight of 525 lbs to handle your bike…

view full answer...

Answer 2

As of (09/30/2024) we do not and none of our vendors have made a custom fit wiring harness for the 2025 Hyundai Tucson, yet. The only option available would be a universal harness like the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat…

view full answer...

Answer 3

Hey Christian. As of right now (8/27/24) we do not have a trailer hitch that has been confirmed to fit the 2025 Hyundai Tucson. The Curt hitch for the 2024 Tucson may fit, but we will not be able to confirm this until we get a 2025 model here at our…

view full answer...

Answer 4

For a class 3 hitch for your 2023 KIA Sportage Plug-In Hybrid I recommend the Curt hitch #C94WR. According to Curt, this will fit all models of the 2023 KIA Sportage. I like this Curt hitch because it has a higher tongue weight rating (525 lbs) than…

view full answer...

Answer 5

We do offer a hitch for the 2022 Hyundai Tucson, part #C94WR which is sold separately from the #CU94FR trailer wiring harness.

view full answer...

Answer 6

There are 2 Receivers that are available for you 2022 Hyundai Tucson Hybrid. Both receivers are 2" class III receivers and are rated for a maximum of 525lbs of tongue weight and a trailer weight of up to 3,500lbs. The Draw-Tite Max-Frame Trailer…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Answer 10

Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

Hey Alan, the Curt hitch part #C94WR that you referenced is a confirmed fit for your 2025 Hyundai Tucson and the recommended install method is to remove the lower bumper panel and leave it off. There might be a way you could remove the panel and…

view full answer...

Trailer Wiring that Fits 2025 Kia Sportage

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching