Replacement Axle for a 4,400 lbs AL-KO Axle
Updated 05/28/2025 | Published 05/23/2024 >
Products Featured in This Question
Question:
Can you recommend axels with brakes for the following AL-KO axel? P/N 402268 T44B-H5-UL-FL- 85/68.5/78-TM-FC-655E-81042. Best I can tell is hub to hub length is 85 and axle bracket center is just about 68 3/4 roughly maybe 69. 6 lug wheels. Thanks- Shane
asked by: Shane L
Expert Reply:
Hey Shane! The closest axle we have to those dimensions is the Trailer Axle w/ Electric Brakes item # e73SR. It has a 86-1/2" hub face and a spring-center-to-spring-center length of 71-1/2". You may be able to get away with the hub face being slightly longer depending on your fenders but you'll need to use the Spring Seat item # TRSS300 to replace the ones that come with the axle.


Patopp
5/27/2025
Man I think you just saved me a bunch of money, Jerred. I have the EXACT same axle that needs replaced and 3/4" would not cause me any headaches either. I was going to have a special order made with a 3 week lead time. You guys have this one in stock! Thank you etrailer for keeping old Q&A's around, online.



Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 5200 lbs
- 6 on 5-1/2 Inch
- 71-1/2 Inch Spring Center
- 86-1/2 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Search Results: spindle
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 - 86-1/2" Long - 6,000 lbs
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Search Results: trailer suspension parts
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer fenders
- Video: Comprehensive Review: Trailer Axle w/ Electric Brakes
- Search Results: tie down anchors
- Search Results: spring seats trailer suspension parts
- Search Results: rv refrigerators
- Search Results: trailer leaf springs
- Shop: etrailer Electric Trailer Jack - A-Frame - 18" Lift - 5,000 lbs
- Q&A: Recommended Axle To Replace Older AL-KO 4400lb Axle # 402268
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 6,000 lbs
- Shop: Kenda Karrier KR53 ST225/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 6 on 5-1/2
- Shop: Trailer Hitch
- Video: Let’s Check Out the Dexter Trailer Axle Beam with E-Z Lube Spindles
- Q&A: Upgrading from 6 Lug to 8 Lug On Dexter 6K Axle
- Shop: Trailer Wiring
- Q&A: Do Both Axles On a Tandem Axle Trailer Need To Be The Same Length
- Q&A: Recommended Replacement Axle for an Al-Ko 4.4k Axle
- Q&A: Replacement Stabilizer Jack Need for Lippert Model 113407
- Q&A: Do Trailer Spindles Just Weld to End of Axle
- Q&A: Replacement Hub/Drum and Brake Assemblies for AL KO 4,400 lb Trailer Axle
- Video: Comprehensive Review: Advent Air Low Profile RV Air Conditioner
- Video: Advent Air Low Profile RV Air Conditioner for Dometic Setup Spec Review
- Video: Let’s Check Out the Rubber Window Edge Weather Strip for RVs
- Video: In-Depth Review of the Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding
Shane L.
5/24/2024
Thank you for this info. 3/4” on each side will not cause me issues. I appreciate your help.