What Is The Difference Between B&W RVB3405 And RVK3405?

Question

Question:

What is the difference between bandw companion rvb3405 and rvk3405?

asked by: Brian

0

Expert Reply:

Hello Brian. So, the # BWRVB3405 is the part number for the Slider Base for B&W Companion 5th Wheel Hitch. The RVK3405 is the part number for the entire Companion Hitch. So, you would get a complete hitch - base and head unit. Our part number for this is # BWRVK3400. This hitch is designed to work with the B&W Turnoverball Gooseneck Hitch.

expert reply by: Jesse M

0

Answer 1

Congrats on the new truck. I drive a Chevy too so I totally get it. You're going to need the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Chevy/GMC - 20,000 lbs item #BWRVB3710. This will allow you to remove the current…

view full answer...

Answer 2

According to B&W, the Slider Base #BWRVB3405 of the B&W Companion 5th Wheel Hitch #BWRVK3400-5W weighs 212 lbs.

view full answer...

Answer 3

Hi Mike; I noticed you were looking at a B&W 5th wheel hitch. Is your gooseneck hitch the B&W Turnoverball? The hole for the ball would be square if it is. If so, you can use the B&W Companion #BWRVK3400-5W. However, this is a heavy…

view full answer...

Answer 4

Hey Gary, yes the base of your current B and W Companion hitch part #BWRVK3500 can be replaced with the #BWRVB3405 which will then convert it to a slider hitch. Did you get a new trailer with a wider nose and need more clearance or did you switch to…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

The Replacement Slider Base for B&W Companion Slider 5th Wheel Trailer Hitch - 20,000 lbs #BWRVB3405 will fit any B&W Turnoverball gooseneck hitch. It is 45 inches long and 34.5 inches wide. The gooseneck center is 15 inches from the back…

view full answer...

Answer 9

Hello Joe, thanks for reaching out. If you were to install a B&W Tunoverball Gooseneck Hitch #BWGNRK1020 you would be able to easily transfer your #BWRVK3400 5th wheel hitch to your new truck. If your new 2025 GMC 2500 HD comes with the factory…

view full answer...

What Is The Difference Between B&W RVB3405 And RVK3405?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching