Replacement 12" x 2" Brakes For Trailer With Mobile Home Axles

Updated 08/23/2023 | Published 08/22/2023

Products Featured in This Question

Brake Mounting Flange for 3" Round Axle

(33)

$41.33

Replacement Shoe and Lining Kit for 12" Manual-Adjust Brake Assembly - 5,200 lbs to 7,000 lbs

(119)

$65.77

etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs

(558)

$135.16

Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 89" Long - 5,200 lbs

(213)

$533.16

Question:

I need shoes and the arm and springs and the clip as shown in this picture. 12 inch by 2 inch.

asked by: Chuck C

Expert Reply:

With you having mobile home axles only designed for one time use you would have to cut off your brake assemblies since the backing plate is welded to the axle. Then you will be able to weld on a Brake Flange # 4-44-1 to each of your hubs. This will allow you to bolt on the Brake Kit # AKEBRK-6 for each of your axles. Then you will be able to get Replacement Shoes # AKBRKR-S-12 in the future.

Depending on the condition of your axle you may be better off replacing the entire axle. If this is something that is needed we do have several different axle like the # e75SR which includes new hubs and brakes. I would need to know the measurements of your axle from hub face to hub face as well as its weight capacity and spring center to spring center lengths to verify if we have a axle you can bolt in place.

expert reply by: Bud M