Is There an Exact Replacement For a Tie Down 46250 Brake Caliper or What Option is There
Updated 03/17/2025 | Published 07/16/2023 >
Products Featured in This Question
Question:
What is an exact replacement for the tie down in the attachment? DeeMaxx Accessories and Parts - DE86VR
asked by: Tom T
Expert Reply:
Finding information on the Tie Down 46250 was not an easy task as it was discontinued awhile back. From what I could find, it looks like the calipers marked 46250 often times have to change the mounting bracket and rotor/hub in addition to the calipers. This means the DeeMaxx Disc Brake Caliper # DE86VR would not be an exact replacement and likely not compatible.
Your best option is going to be a full replacement like the Kodiak Disc Brake Kit part # K2R35D if you have a 3,500 lb. axle or the Kodiak Disc Brake Kit part # K2R526D is you have a 5,200 lb. or 6,000 lb. axle. This will allow you to replace your current system and have a system with replacement parts more readily available.

Product Page this Question was Asked From
Replacement DeeMaxx Disc Brake Caliper - Maxx Coating - 3,500 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 3500 lbs
- 6000 lbs
- Caliper Parts
- Caliper
- DeeMaxx
more information >
Continue Researching
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: brake actuator
- Shop: Replacement DeeMaxx Disc Brake Caliper - Maxx Coating - 3,500 lbs to 6,000 lbs
- Search Results: k2r35d
- Search Results: 5 pin flat connector
- Search Results: 7 pin to 5 pin connector
- Video: The Low-Down on the Kodiak Disc Brake Kit
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Trailer Hitch
- Search Results: brake lines
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: 2010a
- Search Results: kodiak 225 brake caliper
- Shop: Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Shop: Hopkins Endurance 5-Way Flat Trailer Connector - Trailer End - Ergonomic Design
- Shop: Dexter Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Video: Feature Breakdown: Hopkins Endurance 5-Way Flat Trailer Connector
- Q&A: 4 Hole Brake Mounting Flange Dimensions for 10 Inch Brake Assembly
- Video: Kodiak Disc Brake Caliper Review
- Video: DeeMaxx Disc Brake Kit Spec Review
- Q&A: Kodiak Disc Brakes For 3,500 lb Axles on Travel Trailer
- Q&A: Replacement Hub Assembly For a 2014 EZ Loader Boat Trailer
- Q&A: Will Kodiak Disc Brake Kit Fit a #84 Standard Spindle
- Q&A: How to Determine Correct Brakes for Trailer
- Q&A: What Info is Needed to Add Brakes to a Trailer or Replace Axle
- Q&A: Actual Diameter of Kodiak Disc Brake Kit for 3,500 Lb Axles
- Shop: Brake Controller
- Video: All You Need to Know About the Hopkins Endurance 5-Way Flat Trailer Connector
- Shop: Suspension Enhancement
- Video: All You Need to Know About the Kodiak Disc Brakes
Steve G.
3/17/2025
I have the same 46250 caliper. Do you know if this kit worked for the previous person who asked?