Is The TruXedo Pro-Tex Soft Tonneau Protectant Spray Safe to Use On Sentry CT Tonneau Cover?

Question

Question:

I have the sentry CT and am wondering if the Truxedo Pro tec is okay to use for conditioning and water proofing the fabric?

asked by: Larry E

0

Expert Reply:

For your TruXedo Sentry CT tonneau cover you will want to clean with mild automotive Soap # 34911102 and water only. The TruXedo Pro-Tex Soft Tonneau Protectant Spray # TX1704511 is designed for their vinyl fabric tonneau covers.

expert reply by: Bud M

0

Answer 1

TruXedo has their own tonneau cover cleaner. The TruXedo Pro-Tex Soft Tonneau Protectant Spray - 20 oz, part #TX1704511, is designed to work on the vinyl/fabric tonneau covers. It does not have any alcohol or silicones. It is a non-toxic water based…

view full answer...

Answer 2

Sounds like you are looking for the Truxedo Pro Tex Protectant Spray part #TX1704511 which we carry and offer for online purchase. Your soft Truxedo tonneau will do just fine with rain and being ran through a car wash. It was designed to withstand…

view full answer...

Answer 3

I'm happy to hear you are happy with your new TruXedo cover on your 2006 Dodge Ram! To protect your investement and keep your cover looking new for years to come I recommend the TruXedo Pro-Tex Soft Tonneau Protectant Spray #TX1704511 which will…

view full answer...

Answer 4

My Truxedo representative recommends using hot water, car wash soap and a soft bristle brush to remove that sap. It's going to take some elbow grease, but that should remove it. Once you have the sap removed, Truxedo recommends using their…

view full answer...

Answer 5

My Truxedo representative recommends using hot water, car wash soap and a soft bristle brush to remove that sap. It's going to take some elbow grease, but that should remove it. Once you have the sap removed, Truxedo recommends using their…

view full answer...

Answer 6

If you have the Truxedo TS Elevate rails that fit your 2022 Ford Maverick part #TH25FR the Yakima HD Overhaul Ladder Rack part #Y01151-5755 will fit it. We've confirmed this fit.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Hi Mike; the best option for your 2025 Silverado 2500 ZR2 is definitely the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 you looked at. These are going to be the most reliable and durable air bags out there. With a max psi of…

view full answer...

Answer 11

The correct height setting is going to vary by trailer but you can get there taking some measurements. First make sure your trailer is on level ground and then measure from the ground up to the bottom of the king pin. Then on your truck take a…

view full answer...

Answer 12

Hey Carter, thanks for reaching out! The GM trucks with the 6-1/2' bed can use a stationary hitch as long as the 5th wheel trailer has a tapered nose. For your 2025 GMC Sierra 2500 I recommend using the PullRite OEX SuperLite #PUL96ZR for a few…

view full answer...

Is The TruXedo Pro-Tex Soft Tonneau Protectant Spray Safe to Use On Sentry CT Tonneau Cover?

Product Page this Question was Asked From

Continue Researching