To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Most hard covers are tough but bulky, while soft covers are convenient but not as secure. This one gives you both. The 3/4" thick aluminum slats are covered in premium 5-layer polyester and vinyl fabric, giving it the look and flexibility of a soft cover with the strength of a hard one. You can roll it up in seconds for full bed access and lock it down tight when you need protection. It even supports up to 400 lbs of evenly distributed weight when closed, so it’s built for real-world use.

Some covers stick up or look uneven after installation. The Sentry CT uses angled side rails that sit just 1/2" above the bed for a flush, streamlined appearance. The design keeps wind noise down and helps reduce drag for better fuel efficiency. Because the rails mount inside the bed rails, you keep access to stake pockets for racks or tie-downs without interference.

When you need to load tall gear or grab something from the bed, just pull one of the release cables at the tailgate—there’s one on each side. The cover rolls up smoothly and secures with built-in safety straps so it stays put while you drive. When closed, the slam latches at the tailgate and mid-bed automatically engage, locking the cover with your tailgate for added security.




Rain, sun, or snow—this cover is built to handle it all. The 5-layer woven polyester and vinyl fabric resists UV damage and harsh weather, staying flexible from -40°F to 120°F. The blacked-out finish keeps a clean, uniform look whether rolled up or closed, and the aluminum slats protect against hail and debris while keeping the cover aligned and easy to roll.

Installing a cover shouldn’t take all day. The Sentry CT clamps to the bed rails with a no-drill setup, and the self-leveling side rails square themselves automatically as you tighten them. That means the cover rolls evenly and seals properly without constant adjusting. You can even remove the whole thing in seconds without tools thanks to quick-release guides.



Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at Truxedo's line of Sentry CT, roll-up hard Tonneau covers.This custom fit tonneau cover is a great way to protect your truck-bed or any cargo you might have inside from the elements. This is a hybrid cover, meaning we have the sleek look of all the soft tonneau covers but we have the durability of a hard one.To unlock it, all you need to do is find this wire, which is going to be located on the drivers side and another one on the passenger side. Once you pull down on that, that releases the latches and you can roll up your cover. The roll-up design gives you full access to your truck bed. The low profile cover mounts to these 15 degree angle side-rails, for a flush look.The slam latches on both sides of the cover allow you to open and close your tonneau cover with ease. Towards the middle of the cover, we have two more of these slam latches that work in conjunction with the ones at the tailgate to better secure your cover.
The five layers of woven polyester and vinyl make the cover very durable.The slats in and the fabric have have a matte black finish for a stylish look. It's an easy, no drill installation. All you need is a half inch socket wrench to mount your clamps to your side-rails. For times when you might want to travel with your cover rolled up, we do have this vinyl strap with a rubber coated hook to help secure it and keep it in it's rolled-up position.The set of hook and loop pads helps keep the cover in place and provides that nice sleek look.That will do it for our look at Truxedo's line of Sentry CT, roll-up hard Tonneau covers.
Ratings & Reviews

Claire H.
6/10/2026
It looks perfect!! Thank you for the glowing review!

Kate F.
11/13/2026
Elvin, that cover looks sharp on your Ram. I can see why you like the cleaner look without the latches sticking out. Hopefully, this one gives you just as many good years as your old BAK cover did. Thanks for the pictures =)

Bryan
8/22/2023
After a year the cover is still looking great and working great. I wish I had purchased one of these when I purchased my truck, as it is nice to be able to securely store stuff in the bed of my truck.

Gwendolyn Y.
6/18/2025
Thanks for sharing your honest feedback about the cover, Brian. Let us know how it holds up to the rain and the elements when you get to test it out.

Mike L.
8/27/2026
That's not good Edward! I'll get that taken care of for you.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Jenny N.
9/16/2023
There is a lot going on with the cover. Would you be able to send a picture of the cover and the serial number from it.