Replacement Trailer Brake Drums For Dico 15638 With ST175/80R13 Wheels and Tires
Updated 03/29/2023 | Published 03/28/2023
Products Featured in This Question
Question:
Good afternoon. I just bought part # DM72VR from etrailer check brakes now I need them the drum is A Dico 15638 so thr replacement part for this is #AKFBBRK-35-D NOW AS reading on it said this system will work on 14in 15in 16in wheels. I checked my trailer wheel is ST175/ 80 R 13. Im asking because I have A 13in wheel will this part #AKFBBRK-35-D work for me. Thanks for your help.
asked by: Marc C
Helpful Expert Reply:
Instead of using the Hydraulic Brake Kit # AKFBBRK-35-D which requires using 14"-16" wheels you should use the Dexter Galphorite Free-Backing Hydraulic Trailer Brake Assembly Right # T4423400 and Left # T4423500. These will fit with your ST175/80R13 trailer wheels and tires.
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Demco
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Q&A: Replacement for Dico 15638 Hub Drum and Brake Shoes for 10 Inch Atwood Hydraulic Brake Assembly
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Shop: Demco Hydraulic Trailer Brakes - Free Backing - Galvanized - Left/Right - 10" - 3.5K
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Q&A: Will Titan Hydraulic Brake Assemblies # T4423500-400 Fit DICO 15638 Hub/Drums
- Q&A: How to Find Correct Replacement Hubs for Shorelandr Boat Trailer
- Shop: Trailer Wiring
- Search Results: marine bearing grease lubricants sealants adhesives
- Search Results: marine bearing grease
- Search Results: bearing l44649 and l68149 trailer bearings races seals caps
- Search Results: l44649 bearing
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Search Results: brake hoses
- Shop: Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Bolt On - 12,500 lbs
- Search Results: brake line
- Q&A: Replacement Boat Trailer Brakes Rated for 3,500 lbs
- Video: A Closer Look at the Dexter Brake Actuator
- Q&A: Comparing Demco and Titan Disc Brake Actuators with Electric Lockouts
- Video: Demco Hydraulic Brake Actuator-DM8101802 Feature Review
- Search Results: 40716~15
- Q&A: Are D-Washers and Tang Washers Both Necessary on Trailer Spindle
- Q&A: Converting From Hydraulic Drum Brakes to Electric Brakes
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Video: The Low-Down on the Replacement Trailer Hub Bearing
- Video: Detailed Breakdown of the Replacement Spindle Washer