Converting From Hydraulic Drum Brakes to Electric Brakes
Updated 07/03/2018 | Published 07/02/2018
Products Featured in This Question
Question:
My trailer has 25 year old hydraulic surge brakes with Dico 15638 drums. These drums seem to be fairly common. I would like to convert the trailer to electric brakes. If you are familiar with these drums, will they work with Electrics? The lug studs are not recessed like most drums, but there is a 1-1.5inch wide flat ridge slightly taller than the stud heads in the drum loosely where the magnet would contact.
asked by: Jason N
Expert Reply:
I could not find any type of photo of a Dico 15638 drum, but my understanding is they are 10" diameter x 2-1/4" wide, but if there is any potential interference with the magnet you would need to replace your hubs. If you would like to send a photo so I can take a look, please do.
To add electric brakes to a 3,500 lb axle (if that is what you have) you will also need a 4-bolt Brake Mounting Flange # 4-35, a Breakaway Kit such as # 20400, wiring for your trailer as well as a brake controller and wiring for your vehicle, which is vehicle-specific. If you let me know what year, make and model your tow vehicle is (and if it has any type of tow package or wiring already) I can let you know what parts you will need.
Product Page this Question was Asked From
Dexter Galphorite Free-Backing Hydraulic Trailer Brake Assembly - 10" - Right Hand - 3,750 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Free Backing
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Continue Researching
- Q&A: Replacing/Upgrading The Suspension On A 2007 Colorado Tandem Axle 5th Wheel With LRE Suspension
- Q&A: Can Hydraulic Surge Brake Actuator be Locked Out for Electric Brake Conversion
- Q&A: Can a Bolt-On Surge Brake Actuator Replace a Weld-On Surge Brake Actuator
- Q&A: How to Determine Correct Disc Brake Hub & Rotor Kit For Boat Trailer
- Q&A: Recommended Disc Brakes for a 10" Wheel
- Q&A: How Much Back Spacing Is Required For The Disc Brake Calipers On The Kodiak Disc Brakes # KOD27FR?
- Q&A: Does it Matter Which Trailer Brake Assembly is Right and Which is Left
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Change the Axle on your Boat Trailer Without Leaving your Driveway
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: How to Measure a Boat Trailer Axle
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)