How Bright is the Light on the MaxxFan Dome Plus Roof Vent

Question

Question:

How many lumens is the light?

asked by: Dick F

0

Expert Reply:

I checked with MaxxAir but they do not provide a lumens rating for the MaxxFan Dome Plus Roof Vent part # MA00-03810B. It's designed to be more of a nightlight but as we have heard back from a few customers, it's a bit brighter than that. If you check out the attached video on the same model, you can see how bright the light is in a dark room at around the 3:00 mark which should help you better gauge brightness.

expert reply by: Conner L

0

Answer 1

Yes, they will. The Ventline Ventadome Trailer Roof Vent item #V2110SP-24 is compatible with the MaxxAir Standard RV and Trailer Roof Vent Cover item #MA00-933069. This cover will fit with the Ventline Ventadome item #V2110SP-24 and allow you to…

view full answer...

Answer 2

This kit #344270KITW comes with 60 feet of butyl tape. With the two 6 inch fans #VP-543SP you won't use much and even if you installed two of the Ventline roof vents #V2110SP-24 you will have plenty of tape and sealant to get the job done, no…

view full answer...

Answer 3

They do, yes. Both the fan assembly and the LED ring on the MaxxFan Dome Plus Roof Vent #MA00-03810B each have a ground wire and power wire. I attached a picture that shows this a bit more clearly.

view full answer...

Answer 4

We have the Bargman 7-Way, RV-Style Connector w/ Heavy Duty Insulated Cable which is ideal for use in cold temperatures. It is available in either a 6' #54006-057 or 10' #54006-059 length. The Silicon insulation used in the construction is…

view full answer...

Answer 5

Sounds like you would want the 7-Way Molded Trailer End with 6' Cable #54006-009. This is a 6 foot plug and lead that was designed specifically for cold weather so it would work well for you. I attached a review video for you to check out as…

view full answer...

Answer 6

As long as the THNN wire is copper and the proper gauge for what you are wiring on your trailer you can use it. I have attached a helpful article that explains wiring a trailer and the minimum required wire gauges. We recommend at least 10 gauge wire…

view full answer...

Answer 7

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

How Bright is the Light on the MaxxFan Dome Plus Roof Vent

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching