SumoSprings Kit for Front and Rear of 2014 Itasca Sunstar 35F

Question

Question:

can you please tell me the part/product number for Sumosprings, front and rear for a 2014 Itasca Sunstar 35F?

asked by: Tim C

0

Expert Reply:

The correct SumoSprings kit for your 2014 Itasca Sunstar 35F is the part # SSR-180-54-1 for the rear and part # SSF-170-40-2 for the front.

expert reply by: Jameson C

0

Answer 1

Using the SumoSprings Maxim Custom Helper Springs #SSR-180-54-1 will greatly reduce the amount your 2020 Winnebago Adventurer 36Z leans to the passenger side. You will want to install these on both sides otherwise you will have very different…

view full answer...

Answer 2

Hey Mark, the instructions for the Air Lift kit part #AL88240 that you referenced do indicate that you will need to do some drilling to install this kit. That said, we've had a few customer come back and tell us they didn't need to drill at…

view full answer...

Answer 3

When comparing the ride quality between the Timbren #TFFF53B and SumoSpring #SSF-172-40-2 I recommend going with the SumoSprings. Although Timbren is a very solid product, the SumoSprings have been proven to have more of a forgiving support over the…

view full answer...

Answer 4

You're already on the right track with everything you looked at. Your 2018 Thor ACE 30.3 has a GVWR of 18,000 lbs so I recommend the following: -Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR…

view full answer...

Answer 5

The clicking you are hearing sounds like a circuit breaker being stripped and auto resetting. This indicates there is either a wiring issue or the motor is drawing more power than it should. Check the ground wire connection at the battery to ensure…

view full answer...

Answer 6

Although either the #SSR-187-40-1 Sumo Spring or the Timbren #TFRF53A would be a great choice, the Timbren Aeon spring is actually rated higher at 8600 lbs, versus 2600 lbs for the Sumo Springs alternative. Neither of these options will come into…

view full answer...

Answer 7

Hey Dick, Extra space for mounting and breathability for the unit itself is why the manufacturer lists the cutout hole needing to be 22-7/16" wide x 15-3/16" tall. That being said if your cutout hole is smaller but can still fit the #HP99ZR…

view full answer...

Answer 8

You know it wouldn't hurt Rex. Front Sumo Springs like item #SSF-171-40-2 will help with traction, steering, and braking. It'll definitely be a solid upgrade on your Georgetown's stock suspension. The SumoSprings Maxim Custom Helper…

view full answer...

Answer 9

Hello Pat, thanks for reaching out. Yes, we do have sumo springs that will fit your 2021 Thor Challenger 37FH. For the rear axle, I recommend the following: - SumoSprings Maxim Custom Helper Springs - Rear Axle #SSR-187-54-1 These are 7,000 lb…

view full answer...

SumoSprings Kit for Front and Rear of 2014 Itasca Sunstar 35F

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching