Replacement Washer Shim .875 ID x .30 Thick for Demco 5th Wheel Rail Adapter

Question

Question:

Do you sell Demco part # 14423 washer shim 875 Id x .030 thk. Do they make different thickness?

asked by: James M

0

Expert Reply:

Yes, we do offer the part you're inquiring about for the Demco 5th Wheel Rail Adapter part # DM6333, it's the Demco Washer Shim part # DM96GV.

expert reply by: Conner L

0

Answer 1

Starting with the safety chains they really need to be attached to the trailer frame and not the coupler hardware. If there is no where to attach the chains on the trailer you can weld on safety chain mounting brackets such as #MB12, #MB38, or #MB58.…

view full answer...

Answer 2

Hey Fred, with the Demco adapter plate part #DM6333 it's not necessary for there to be resistance in the levers as you turn them to secure it to your truck's puck kit. As long as they turn all the way and can be locked in that position…

view full answer...

Answer 3

According to the Demco install instructions I attached for the #DM6333 all of the hardware that holds the pucks in position should be torqued to 35 ft lbs.

view full answer...

Answer 4

The Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package, part #DM6333 has a shipping weight of approximately 106 lbs.

view full answer...

Answer 5

The mounting pucks of the Demco fifth wheel rail adapter part #DM6333 are adjustable so that they can be positioned perfectly to fit your rail kit. If you check out the picture I took from the install instructions you can see how this is done…

view full answer...

Answer 6

According to my research, the Pullride 2700 Series Superglide uses industry standard bed rails, which is what the Demco #DM6333 adapter provides. You can check this for yourself. If the mounting tabs for your hitch (not the pucks in the bed) measure…

view full answer...

Answer 7

Yes, the Demco 5th Wheel Rail Adapter #DM6333 will fit your 2020 GMC Sierra 2500 6-3/4' bed with OEM prep package. The adapter does have industry standard rails so your Reese 5th Wheel Trailer Hitch #RP30047 will fit to the adapter.

view full answer...

Answer 8

With a few exceptions, you will indeed need a sliding hitch for your short bed Silverado. Here are the exceptions: • You won't need a slider if your 5th wheel is equipped with a rotating pin box like the Reese Sidewinder/Revolution or the Lippert…

view full answer...

Answer 9

The Demco rail adapter kit that you need for your 2020 GMC Sierra 3500 HD is part #DM6333 which is different than the part #DM6194 which was referenced for the 2019 model year. The adapter #DM6333 has a 21K weight capacity and it is compatible with…

view full answer...

Answer 10

I did contact Demco directly and they confirmed that is normal for the rail assembly to be above the bed using the Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package #DM6333. The way the manufacturers designed their puck…

view full answer...

Answer 11

It could be possible that the tabs on the Reese Slider are just a bit too wide for the slots on the rails. The Demco adapter part #DM6333 is an industry standard rail adapter so it is compatible with the Reese Slider as long as the Reese slider fits…

view full answer...

Answer 12

Welcome back! I took a look at you order history and the Demco 5th Wheel Rail Adapter item #DM6194 you bought back in 2019 does not fit the puck system in your new 2024 GMC Sierra 3500. GM changed the puck pattern starting in the 2020 model year.…

view full answer...

Replacement Washer Shim .875 ID x .30 Thick for Demco 5th Wheel Rail Adapter

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching