Trailer Hitch Ball Sizes Commonly Used With a Class III Receiver

Question

Question:

Which ball size is more standard for a class 3 trailer hitch, the 2inch or the 2- 5/16? Thank you.

asked by: GEORGE S

0

Expert Reply:

While most your class 3 trailer hitch receivers are rated for 3,500lbs-8,000lbs the hitch ball size is generally determined on the trailer. The 1-7/8" Hitch Ball # 19260 is generally found on very small trailers with a total weight below 2,000lbs. The 2" Hitch Ball # 40038 will be the most common size used on most utility trailers you would be able to tow. The 2-5/16" Hitch Ball # C40005 is commonly found on larger trailers but is also the most popular size used on camping trailers. We do offer a Convert-A-Ball Interchangeable Ball Set # 900b that allows you to easily switch between ball sizes if you tow multiple different trailers.

I find having a ball mount like the B&W Tow & Stow 3-Ball Mount # BWTS10048B is great as you will have all 3 ball sizes and be able to adjust the height from a 5-1/2" rise to a 5" drop to keep the trailer level while towing.

expert reply by: Bud M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hello Allan, thanks for reaching out. The K-Source Snap & Zap Custom Towing Mirrors #KS48NQ will not obstruct the 360 degree camera on your 2022 Toyota Tundra. The towing mirror does not actually cover the part of the mirror that has the camera.…

view full answer...

Answer 4

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 5

Hey Jeff, it sounds like you have the CIPA tow mirrors part #CTM4000 that fit your 2005 Toyota Tundra which we do have replacement hardware for with the part #KLV-4010.

view full answer...

Answer 6

Hey Geroge, The advantage of the EcoHitch #EH39CR over the Draw-Tite #65076 for your 2025 Ford F-350 Super Duty is that the receiver sits up higher so you get better clearance for your accessory and you don't lose any ground clearance. The…

view full answer...

Answer 7

Hi there Ron, it looks like as long as your 2024 Ford F-350 does not have dual rear wheels the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH39CR will fit. If you do have dual rear wheels, then you'd need to use the EcoHitch Hidden Front…

view full answer...

Answer 8

Yes, that is correct Tom! So long as the Portable Power Watchdog Surge Protector item #HU42VR is connected to WiFi you'll get notifications assuming your phone also has signal. If you have any additional questions feel free to throw them into the…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Robert, I have a front hitch solution that will work for your 2024 Ford F-250 with the Draw Tite hitch part #65076 but the EcoHitch you referenced does not fit the diesel models so it would not work with you. What will you put in the front…

view full answer...

Trailer Hitch Ball Sizes Commonly Used With a Class III Receiver

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching