3" Slip Hub For A 3" RV Waste Valve
Products Featured in This Question
Question:
Hello, As with most cable valve systems. They start to leak over time. I want to add a new dump valve by the hose connection so when I remove the cap nothing comes out. I want to cut the existing 3 inch pipe and add the valve into the middle of it. Can I take the new T40 valve remove the flange on one side and install the T1005 on the valve and then put directly inline with the 3 inch pipe? I believe this will now give me a 3inch slip hub on both ends of the valve to go over my existing 3 inch pipe on both sides of the valve. Thanks for your help.
asked by: Matt B
Expert Reply:
You can do that, however the mounting holes on # T1005 are a bit too close together, and won't properly mount to the Valterra Bladex Waste Valve for RV Black Water Tank # T40.
Instead, I recommend using the LaSalle Bristol RV Sewer Slip Hub with Flange # 34466V13 which has a farther apart mounting hole location.
To properly secure these items together, you're also going to need some solvent # 3447530889 .
Product Page this Question was Asked From
Valterra RV Sewer Slip Hub with Flange - 3"
- RV Sewer Hose Fittings
- Sewer Seals and Gaskets
- Slip Hubs
- Hub
- Sewer Pipe to Waste Valve
- 3 Inch Diameter
- Valterra
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Does The Valterra RV Sewer Slip Hub with Flange T1005 Come With A Gasket?
- Search Results: t1003~9vp
- Video: Checking Out the Valterra RV Sewer Slip Hub with Flange
- Shop: LaSalle Bristol RV Sewer Slip Hub with Flange - 3"
- Shop: Valterra RV Sewer Slip Hub with Flange - 3"
- Video: Feature Breakdown: Replacement Seals and Hardware for Valterra Bladex RV Waste Valves
- Video: What to Know About the Replacement Seals and Hardware for 3" Valterra Waste Valves
- Shop: Replacement Seals and Hardware for 3" Bladex Waste Valves
- Shop: Replacement Seals and Hardware for Valterra Bladex RV Waste Valves - 2" Diameter
- Shop: Replacement Seals and Hardware for 3" Valterra Waste Valves
- Q&A: Gate Valve Mounting Bolt Spacing for Valterra T40A Bladex Waste Valve
- Q&A: Replacement Waste Valve for Black Water Tank
- Q&A: Which Valterra Bladex Waste Valve Will Fit Schedule 40 PVC Pipe 3 inch Diameter
- Q&A: Slip Hub for Attaching a Waste Valve to a 3" Outlet on a Gray Water Tank
- Search Results: t40b
- Search Results: valterra
- Video: Detailed Breakdown of the LaSalle Bristol RV Sewer Slip Hub with Flange
- Video: Valterra Bladex Waste Valve for RV Black Water Tank: The Breakdown
- Video: Feature Review Valterra RV Sewer Spigot with Flange
- Video: An In-Depth Look at the Valterra Bladex Waste Valve for RV Black Water Tank
- Shop: Valterra Bladex Waste Valve for RV Black Water Tank - No Handle - 3" Hub to 3" Spigot
- Shop: Valterra RV Sewer Spigot with Flange - MPT - 3"
- Q&A: Complete Flat Towing Setup for a 2025 Ford Ranger XLT 4X4
- Search Results: rv waste valves
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Fifth Wheel Hitch
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Search Results: rv sewer hose fittings
- Shop: Trailer Wiring
on RV Sewer Hose Fittings
