Slip Hub for Attaching a Waste Valve to a 3" Outlet on a Gray Water Tank

Updated 08/10/2022 | Published 08/08/2022

Products Featured in This Question

Valterra RV Sewer Slip Hub with Flange - 3"

(205)

$7.25

Valterra ABS Solvent Cement - 1/4 Pint

(204)

$21.29

Valterra Bladex Waste Valve Body for RV Black Water Tank - Aluminum Handle - 3" Diameter

(751)

$23.68

Question:

Hi, Im building a camper and Im at the point ot setting up the gray water tank. Im thinking I will use a Ronco 65H 20 gallon polyethylene tank connected to a 3inch slip hub such as P/N T1005. This will go to a guillotine valve and then an elbow for the sewer hose hookup. My questions are: 1 Is the slip hub a good option for connecting to the 3inch outlet of the tank? 2 What adhesive should I use to bond the polyethylene to the ABS plastic of the slip hub? Thanks

asked by: William M

Expert Reply:

Yes, using the Valterra RV Sewer Slip Hub with Flange # T1005 paired with a guillotine style waste valve like the Valterra Bladex Waste Valve Body # T1003VPM is a good option for your gray water tank. This would bond together using the Valterra ABS Solvent Cement # A05-0303.

expert reply by: Scott S