Replacement Power Converter For Magnetek 6345A Power Converter

Question

Question:

Can I replace my Magnetek 6345A power converter with a Parallax 8345A power converter? Do you have a wiring diagram for each converter?

asked by: Le S

0

Expert Reply:

The Replacement Converter # PD4645V does work as a replacement for both your Magnetek 6345 and the Parallax 8345A converters. I have linked the installation instructions below that will cover the removal and installation procedures to be used on both converters.

expert reply by: Bud M

0

Answer 1

Yes, you do have the exact right replacement converter for your 45 amp Magnetek 6345, which is the option from Progressive Dynamics: - Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V I have added links below to…

view full answer...

Answer 2

The correct replacement you need for the Parallax/Magnatek 6300a model 6345 is definitely the #PD4645V. This system has the same 45-amp output and is 100% made in the U.S.A. I went ahead and attached a demo video for you to check out.

view full answer...

Answer 3

We offer a direct replacement for your current 45A Parallax/Magnetek 6345 Power Center. The Progressive Dynamics Replacement Converter, part #PD4645V is exactly what you'd need. I've linked to a product description video for the #PD4645V…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 6

Since they didn't list the converter amperage rating on your panel you'll have to just choose the amperage your battery bank requires and then do a bit of investigative work to ensure that the wire gauge used for the converter is enough to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 9

Hey David, The correct fitting replacement converter cross-section for your MagneTek 6345A would be the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V. This converter section is now compatible with flooded lead…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 12

I have a solution for you but there isn't just a replacement converter section for the Elixir ELX-45. You're going to need to replace the entire panel with the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger item…

view full answer...

Replacement Power Converter For Magnetek 6345A Power Converter

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching