Best Parts to Upgrade a Harbor Freight Trailer
Updated 06/04/2022 | Published 06/03/2022
Products Featured in This Question
Question:
I have a harbor freight trailer that I need to replace the axel/tires/spring/etc on. I am looking at the following items, but not sure if Im missing anything. 1 - 20545I-EZ-60-10 2 - DX93QR 2 - AM30820 2 - TRSS175 1 - APUBR-10 Someone said I should get new hangers, but Im not sure which ones go with the springs.
asked by: Matt S
Expert Reply:
I can confirm that the parts listed below are all compatible. I do recommend replacing your spring hangers since you are upgrading everything else on your suspension. The Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front item # APS6SE will work great with your springs.
Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs item # 20545I-EZ-60-10
Kenda Loadstar 5.30-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range C item # AM30820
Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1 item # TRSS175
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts item # APUBR-10
Dexter Axle 4-Leaf Slipper Spring w/ Hook End for 2,500 lb Trailer Axles - 26-3/4" Long item # DX93QR
Your lowest capacity components are 2,000 lbs so you will want to ensure you do not exceed this weight limit.
Product Page this Question was Asked From
Dexter 4-Leaf Slipper Spring w/ Hook End for 2,500 lb Trailer Axles - 26-3/4" Long
- Trailer Leaf Springs
- Slipper Springs
- Nylon Bushings
- 2500 lbs
- 2 Inch Wide
- 4 Leaf
- 26-3/4 Inch Long
- Standard Grade
- Dexter
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front
- Shop: Dexter 4-Leaf Slipper Spring w/ Hook End for 2,500 lb Trailer Axles - 26-3/4" Long
- Search Results: slipper springs ~ 2 inch trailer suspension parts
- Q&A: Dimensions of Hangers Included with Single-Axle Trailer Hanger Kit for 2" Slipper Springs APS6SE
- Q&A: Bolts Needed To Install Slipper Springs
- Q&A: What Gauge Wire Is Required On a 7-Way Connector
- Shop: Optronics Thinline LED Utility Light - Submersible - 386 Lumens - Clear Lens - 12-5/8" Long
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Dexter Trailer Axle Beam w/ Idler Hubs - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" Long - 3.5K
- Shop: Karrier ST205/75R14 Radial Trailer Tire with 14" White Wheel - 5 on 4-1/2 - Load Range C
- Search Results: trailer wire gauge
- Video: All You Need to Know About the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Shop: Brake Controller
- Q&A: Recommended Wire Gauge for Wiring Trailer Brakes
- Q&A: Dimensions Of Slipper Spring Width Of Dexter Leaf Spring # DX93QR
- Q&A: Wire Gauge Recommended for a 7-Way Trailer Connector
- Q&A: What is the Minimum Space Between Tires on a Tandem Axle Trailer
- Search Results: hub adapter
- Search Results: wheel spacer