Option to Replace Atwood G6A-7 Water Heater

Question:

I need to replace my Atwood G6A-7 6 gallon water heater for my R-Vision Trail lite Crossover rv, whats a good replacement and what other parts do I need?

asked by: Wes A

Expert Reply:

To replace your Atwood G6A-7 water heater, the best option, by far, is a tankless heater. Tankless heaters are better than the older, manual pilot heaters like the Atwood models because they are much easier to use with their wall control, they conserve energy so well by only using it once you turn the water on, and - maybe most importantly - give you immediate hot water, which is always a fantastic thing.

So I highly recommend a tankless heater from Fogatti, which comes in either white or black, and you'll also need a pressure relief valve for the install:

- White: Fogatti RV Tankless Water Heater # FG86FR

- Black: Fogatti RV Tankless Water Heater # FG26FR

- Camco RV Water Heater Temperature and Pressure Relief Valve # CAM10423

The only thing to keep in mind is that the Atwood heaters had very large doors, at 18" wide x 14" tall, so you're going to have to adjust the opening a bit for these doors that measure 15" tall x 18" wide.

The Fogatti heaters require a cutout that is 13" wide x 13" tall x 13-13/16" deep, so they will fit the same depth and width as your Atwood, which is 12-1/2" tall x 16" wide x 18" deep, but you'll want to make sure you have that extra height in the space for your heater.

expert reply by: Kyle S

Matt

10/12/2024

Hello Have a customer with a failed Atwood model (same as above) and found your part numbers for the fogatti replacements are incorrect & just for the doors on them. Could you let me know the correct part numbers to interchange a fogatti for this Atwood model? Many thanks

Kyle S.

10/14/2024

@Matt Sure thing; you can use the Fogatti InstaShower 8 Plus RV Tankless Water Heater - 55,000 Btu - 15"x18" Black Door # FG26FR or White Door # FG86FR.