Replacement Hardware Needed For a Curt Trailer Hitch Receiver 13333

Question

Question:

What size is the hex bolt in the Curt Hitch 13333

asked by: William J

0

Expert Reply:

The Curt Trailer Hitch Receiver # 13333 requires the following hardware.

Flat-head socket bolt, 3/4"-10 x 3-1/4", grade 8 Qty. 1
Carriage bolt, 1/2"-13 x 1-1/2", grade 8 Qty. 2
Square-hole spacer, 1/4" x 1-1/2" x 3" Qty 2
Serrated-flange nut, 1/2"-13 Qty 2

All of this is available if you order the Replacement Hardware Kit # RHK and enter the Curt 13333 in the appropriate fields when ordering.

expert reply by: Bud M

0

Answer 1

No, the Replacement Mounting Hardware #C75JR is not going to fit the Curt Class III Hitch #C13135. If you are in need of a hardware kit for the #C13135 hitch, we can provide that with Part #RHK. When you go to the page for #RHK you will see a box…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Factory brake controllers seem to unfortunately be very temperamental and usually quite a bit more expensive that an aftermarket brake controller so I have to recommend going with an aftermarket option. Luckily there is a brake controller port so…

view full answer...

Replacement Hardware Needed For a Curt Trailer Hitch Receiver 13333

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching