TST Tire Pressure Monitor Sensors for a Ford F-450 Dually
Products Featured in This Question
Question:
FIRST PART- We have flow thru sensors on our camper- but we need to put them on the F450 SD dually. I am pretty sure theres not enough wiggle room for the flow thru, so I need to know if the cap type WITH THE SPECIAL TOOL will go on. Looks like I might need to get my tire shop to remove the first wheels so that I can install them on both inner and outer? I can get my hand into the inner tire, but I dont see the tool working on either! Im sure we are not the first F450 needing sensors. Thank you so much for this advice. SECOND part- think we need to trade out the flow thrus on the camper for the cap type as hubs says the camper valve stems are rubber or part rubber. new camper Thanks. As soon as I know which type will work, Ill be ordering them from you. Many thanks. TST also recommended you! over the years I ordered directly from them- happy they said order from you.
asked by: Kathee G
Expert Reply:
Regardless of whether you go with the cap style or flow through, they use the same monitor so you should be good to continue use with your current monitor. I would recommend sticking with the flow through sensors like the Flow Through Tire Sensors for TST TPMS # TST-507-FT-S2 that you already have if they can fit your dually wheels. Since you already have some, you could remove them and test fit them first.
Pretty much all valve stems have at least some rubber on them, more than likely your camper valve stems are going to work with the flow through sensors. If you wanted to send me some pictures of your stems, I would be happy to take a look at them for you.
If you do not feel that the flow through sensors are going to work, then the Brass Tire Sensors for TST TPMS # TST-507-RV-S4 would be a good route to go. We do have some solid valve extension options that will can be used with tire pressure monitoring systems. They come in different lengths, depending on what length you need, the Wheel Masters Tire Pressure Valve Extenders - 2" Long # WM80292, 3" Long # WM80293, and 4" Long # WM80294.

Product Page this Question was Asked From
Brass Tire Sensors for TST TPMS - Qty 4
- Accessories and Parts
- TPMS Sensor
- Tire Pressure Monitor Parts
- Sensors
- TST
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How Much Clearance Is Lost When Switching To A Gen-Y Gooseneck Pin Box
- Q&A: Does Signal Repeater of TST TPMS for RVs Have to Be Installed
- Q&A: Will TST TPMS Sensors Work With the 770 Touch Screen Monitor
- Q&A: Correct Pin Box to Replace a Turning Point
- Q&A: Is The TireMinder Signal Booster Required? Or Will The TPMS Work Without It?
- Q&A: Is There a Correct Valve Stem Length For Installing TPMS System
- Q&A: Comparing Viair Portable Compressors For A Tandem Axle Airstream Travel Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Trailer Maintenance Schedule
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)