What is Tongue Weigth of 25 ft Aerolite Travel Trailer for Weight Distribution

Question

Question:

what is the tongue weight for 2012 aerolite 25ft travel trailer

asked by: Stephen C

0

Expert Reply:

The only 25 foot 2012 Aerolite travel trailer I can find is the M-232E Shuttle series which weighs 4,326 lbs and would have a dry hitch weight of 534 lbs and able to carry up to an additional 1000 lbs. So when loaded you'd probably be looking at a tongue weight of around 650 lbs. Which this would match up well with the Reese Strait Line part # RP66083 that you referenced which has a tongue weight range of 400-800 lbs and features best sway control at fighting sway before it starts.

expert reply by: Jameson C

0

Answer 1

Hello Joeseppi, Let's get you into the right camper tie-down. Just as long as your 2021 Ford F-350 does not have factory flip-out steps that are mounted under the bed you will want the TorkLift Tie Downs - Custom Frame Mount - Front and Rear…

view full answer...

Answer 2

For a weight distribution system, there are always exceptions,but in general the systems with only bars and chains do not have sway control. They are adjustable in tension for different weight, but are a little more work. The bar systems whether…

view full answer...

Answer 3

Hello Mark, Happy to help you find the right weight distribution hitch to meet your needs. I don’t have a database that supplies specs for trailers (though it would be pretty sweet if one existed), so based on my research, the Rockwood Mini Lite…

view full answer...

Answer 4

For your 2007 HS ADMIRAL SVE, your Hidden Hitch receiver sounds like it is capable of towing your trailer. The rated 5,000 lb capacity is without weight distribution, but from my research it is rated for 6,000 lbs with weight distribution just like…

view full answer...

Answer 5

As long as your Strait-Line Weight Distribution (WD) System, like part #RP66083, isn't underrated for your towing setup and you haven't gone past the 5th chain link like you mentioned then you should be good to go. With friction sway control…

view full answer...

Answer 6

Hey John, The SumoSprings Solo Custom Helper Springs #SSR-612-47 are what I recommend installing on your 2021 Toyota Tacoma because they have zero maintenance, and you'll only feel them when you actually need them, so they won't affect your…

view full answer...

Answer 7

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system it's…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

view full answer...

Answer 12

So the answer is yes, with your 2-1/2 inch receiver you will still be able to use the Thule T2 Pro XTR Bike Rack #TH83JV. You are correct, however, that the your standard hitch reducer sleeve isn't going to work, so what you will need instead is…

view full answer...

What is Tongue Weigth of 25 ft Aerolite Travel Trailer for Weight Distribution

Continue Researching