Replacement LP Regulator For Marshall 605H Regulator

Question

Question:

Looking for an LP regulator 605 H or the replacement for that

asked by: Susan S

0

Expert Reply:

Thanks for the picture!

To replace your Marshal 605H propane regulator you will need to go with the Camco Vertical 2-Stage Propane Regulator # CAM59313. This will be an exact replacement for your current regulator.

I included a video review of the # CAM59313 for you to take a look at.

expert reply by: Samuel C

0

Customer Picture
(click to enlarge)

Paul

9/25/2024

will this work in horizontal position ?

Reply

Samuel C.

9/25/2024

@Paul The # CAM59313 will only work in a vertical application. You'll need # 108221 for a horizontal application.

Reply

Answer 1

We have what you are looking for but your regulator currently vents out of the bottom of the regulator and the one you referenced vents out of the side. So to match the correct orientation you'd want the part #CAM59313.

view full answer...

Answer 2

Based on the pictures I could find for the Marshall 605h model 250 it's an automatic changeover 2 stage regulator so you'll want the Automatic Changeover RV LP Gas Regulator Item #37207-30395. If your regulator is a different design then…

view full answer...

Answer 3

The valve in your regulator is likely going bad and allowing the gas leak so you would want to replace it. I recommend swapping it out with the JR Products Compact Automatic Changeover 2-Stage Propane Regulator #37207-31525. This has 1/4" FIF…

view full answer...

Answer 4

The best replacement option we have for your Marshall 605H LP Regulator is the Automatic Changeover RV LP Gas Regulator #37207-30395 that you were already looking at. This auto-changeover regulator comes with a small indicator on the front of it to…

view full answer...

Answer 5

We do have some LP gas detectors available, but none would be a direct replacement for your CCI 7770.2 / Pre Tell 22. From what I could find on your CCI 7770.2 / Pre Tell 22, it has dimensions of 6.25" wide x 3.9" tall. The RV Propane Gas…

view full answer...

Answer 6

The Marshall 605h Model 290-01F regulator you have is horizontal so the correct replacement is the Camco Horizontal 2-Stage Propane Regulator - 160,000 Btu/Hr Item #CAM59323. You'll want to place the vent down to prevent rain, ice, snow, and…

view full answer...

Answer 7

To replace one of the arms on your Yakima HoldUp Bike Rack for 4 Bikes #Y02443-2 you'll have to replace the entire tray since the arm isn't available as it's own part. You'll need part #8890280 for the front (closer to vehicle) tray…

view full answer...

Answer 8

The parts between the Yakima Holdup and Holdup Evo bike racks are not interchangeable which means the part #8880828 would be what you'd need for the rear tray.

view full answer...

Answer 9

Hey Kerry, thanks for pointing that out and you're right that IS confusing. So what I did was went and checked with Yakima directly for the part numbers to make sure you get the right one, and that's what we'll go by - the…

view full answer...

Answer 10

That's a great question. I checked with Yakima and was told that the #Y8890279 replacement spine could be used with the trays scavenged from your older HoldUp 2 bike rack to construct a 2 bike add-on for your #Y02479 HoldUp EVO bike rack. The…

view full answer...

Answer 11

We don't carry the Marshall line of regulators but you can replace your Marshall 230 - 605H regulator with the Camco Vertical 2-Stage Propane Regulator #CAM59313. From what I can find on the 605H it appears to be a dual stage vertical venting…

view full answer...

Answer 12

I have another option for you, but the closest standard axle we offer to your 86-1/2" hub face to hub face measurement is the Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs #T3584F-EZ-8974 which measures 89" hub…

view full answer...

Replacement LP Regulator For Marshall 605H Regulator

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching