Can Lag Bolts be Used to Install Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chock
Published 09/14/2021
Question:
Can Erickson wheel chock be mounted with Lag bolts. I dont have access to the bottom of my toy hauler.
asked by: Randall K
0
Expert Reply:
Yes the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM09160 can be installed with lag bolts. It's really up to the application and your best judgment on how best to install this kit and lag bolts would work just fine.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs
- ATV-UTV Tie Downs
- E Track Ends
- 1 Strap
- Manual
- 6 - 10 Feet Long
- E-Track Strap
- Ratchet Strap
- 1-1/8 - 2 Inch Wide
- 1201 - 1500 lbs
- Erickson
more information >
Continue Researching
- Q&A: What Size Bolts Do I Need For The Erickson ATV E-Track Tie-Down Kit
- Video: What to Know About the Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks
- Video: etrailer E-Track Backing Plates w/ Hardware Spec Review
- Video: Complete Breakdown of the etrailer E-Track Backing Plates w/ Hardware
- Video: The Low-Down on the NOCO Speed Charger
- Video: Breaking Down the Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks
- Video: An In-Depth Look at the Backing Plate for D-Ring Tie-Down Anchors
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Shop: Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs
- Shop: Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs - 4 Wheel Set
- Shop: NOCO Speed Charger - 10 Watt - 2.1 Amp
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4
- Shop: Backing Plate for D-Ring Tie-Down Anchors - 8 Hole - Qty 1
- Search Results: erickson
- Search Results: etrack mounting screws
- Search Results: e track backing plate
- Search Results: erickson tie down anchors
- Search Results: backing plate
- Q&A: Are Backing Plates Necessary for Erickson ATV E-Track Tie-Down Kit # EM09160
- Q&A: Speed Charger and USB to USB-C Cable For A NOCO Genius Boost GB40 Jump Starter
- Q&A: Backing Plate Recommendation for Use with E-Track Installed on Wood Floor
- Q&A: How Many Erickson Etrack EM09160 is Needed to Secure an ATV
- Q&A: Replacement Brake Assemblies and Hub/Drums for 15k Dexter Axle
- Q&A: Is Risk Racing Lock-N-Load Pro Strapless Dirt Bike Transport System Compatible With Composite Bed
- Article: How to Install E-Track in 3 Easy Steps
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: How Does an RV Water Pump Work?
- Article: Pintle-Hitches
Explore Expert Info
![Our Expert]()
on ATV-UTV Tie Downs
on ATV-UTV Tie Downs
