Yakima Roof Rack that Fits Leer Truck Topper Tracks

Question

Question:

I recently got a leer truck topper with the factory thule tracks installed. I am looking to finish the rack as I didnt get the thule caps to connect the crossbars. I have a yakima rack on another vehicle and hoping to use the crossbars off that. Can i fit yakima landing pads into the thule track system? I am trying to avoid having to buy entire thule roof rack system. Thanks

asked by: Nicholas D

0

Expert Reply:

We have the Yakima roof rack components needed to install in the tracks on top of your Leer 100XR camper shell.

To complete your roof rack setup you will need:
quantity 2 of the Landing Pad 1 # Y00221
quantity 4 of the Control Towers # Y8890027
and depending on the length of your cap
quantity 2 Crossbars like:
48 inch # Y00408
58 inch # Y00409
66 inch # Y00410
78 inch # Y00411

To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Robert, basically what you need to add brakes to a trailer is three things. The correct hub/drums to replace your idler hubs, brake assemblies, and wire to wire up the assemblies. To pick out the correct hub/drums we need two pieces of info. The…

view full answer...

Answer 3

Hi Michael; you can use the same fit kit #THKIT3101 and mounting feet #TH460R. However, the longest WingBar Evo is 60" #TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the #TH713700 which…

view full answer...

Answer 4

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 5

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 6

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 7

The difference between the Yakima Landing Pad 1 #Y00221 and Landing Pad 26 #Y75ZR are what they fit. The two come with different hardware and the Landing Pad 1 is mostly for some factory tracks as well as specific vehicles, while the Landing Pad 26…

view full answer...

Answer 8

Hello Jay. It sounds like you are definitely on the right track here. The TrackTowers #Y52AV and the RoundBar SL Adapters #Y03536 will definitely be your best bet for adding Yakima round bars to the T-Slots on your Retrax Tonneau Cover. The…

view full answer...

Answer 9

I have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails #RTT-82381 on the Cover #RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac #A54KG would be an option as this…

view full answer...

Yakima Roof Rack that Fits Leer Truck Topper Tracks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching