Recommended Ratchet Straps for Securing 1500 lb UTV

Question

Question:

I have a cfmoto zforce 950 and it weighs about 1500 lbs. what straps should I get

asked by: Cedric V

1

Helpful Expert Reply:

The # 297-7RSBB-UTV ShockStrap ratchet kit you'd looked at wouldn't have enough capacity to handle the 1500 lb weight of your UTV. Two sets of the # 297-9RSDB would offer a WLL (working load limit) of 2000 lbs which would be perfect for a UTV of that size. The straps measure 2 inches wide by 9 feet long when fully extended. The shock absorbing properties of the straps make them ideal for UTV's and motorcycles.

If you click the provided link, you can see a demonstration video for the straps I recommended.

expert reply by: Mike L

1

Answer 1

The diameter of the replacement threaded rod part #37207-30525 that you referenced is 1/2 inch in diameter and has a thread pitch of 13 threads per inch.

view full answer...

Answer 2

The Treaded Rod #37207-30525 will allow you to switch the size of your propane tanks from 20lb to 30lb. The Complete Propane Tank Holder Mounting Kit #37230WH is for applications where you are adding dual tanks or replacing everything due to damage.…

view full answer...

Answer 3

The ShockStrap Ratchet UTV Tie-Downs part #297-7RSBB-UTV are what I recommend to secure a Polaris RZR as the 1,000 lb weight capacity per strap will be more than enough for the weight of the RZR. These are an excellent option that have built-in shock…

view full answer...

Answer 4

Although both systems have a strap that measures 2 inches X 6 ft, they have completely different mounting styles and that is why the difference in the WLL(safe working load limit) exists. The WLL is 1/3 of the maximum break strength of the system. As…

view full answer...

Answer 5

The mounting points for the Tow-Rax Low-Profile Floor Track #TWSP72TA are spaced every 12" with the 6' track having 7 mounting holes. The hole opening will accept a 1/4" countersunk screw and I recommend using a stainless steel screw…

view full answer...

Answer 6

Ryan, the BulletProof Hitches Weight Distribution System w/ Sway Control #BPH46VR does not come with a shank, but the shank they'd normally use would be the Weight Distribution Shank for BulletProof Hitches Adjustable Ball Mount #358WEIGHTDIST.

view full answer...

Answer 7

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

view full answer...

Answer 8

When securing your motorcycle inside your enclosed 12 foot long trailer using a chock like the Tow-Rax #TWSPWM the most important factor to consider is the trailer's tongue weight. You will just want to make sure that its tongue weight with the…

view full answer...

Answer 9

The etrailer Horizontal E-Tracks like part #e42VR are a great option for securing vehicles especially when combined with the Erickson E-Chock Wheel Chocks part #EM09162-2 and Erickson E-Track Strap with Ratchet part #EM59136. I don't really have…

view full answer...

Answer 10

You can absolutely install E-Tracks like the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4 #e42VR you were looking at in your Forest River Enclosed Cargo Trailer yourself. Now there are a few things to…

view full answer...

Answer 11

The correct replacement amber beehive light you would need for your Yakima Rack and Roll Trailer part #Y08106 that you referenced would be the #Y8880187.

view full answer...

Recommended Ratchet Straps for Securing 1500 lb UTV

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching